07-27-2013, 11:03 AM
I did the 600-mile service today, and as expected, no real problems. Filter wasn't absurdly tight, but the drain bolt was unbelievably loose.
Despite my best efforts, I still got some oil on the garage floor, and my clothes. (It's impossible not to!!!)
Lastly, I must admit that I had two very close calls, and lessons learned.
1. Never put the bike on it's center stand when you have the key in the side seat lock. Unknowingly, my leg was placed against the protruding key, and as I levered the bike back, I felt an unfamiliar pressure on the left knee. Looking down, i noticed I had just bent the key about 20 degrees! I couldn't believe it....Luckily, it bent back exactly how it was, and no issues thereafter.
2. Be aware of your surroundings! As I was unscrewing the old filter, for whatever reason, I'm trying to read some of the lettering on the filter. Why? I have no idea. But as my eyes wander upward, I realize my forehead is about 2 inches from a raging-hot header pipe; the bike had been running only a few minutes earlier. It wouldn't have taken much effort to lean forward a little, and that would have completely, thoroughly, absolutely, and positively ruined my day.
Anyway, thanks for the write-up folks, it was a big help
Despite my best efforts, I still got some oil on the garage floor, and my clothes. (It's impossible not to!!!)
Lastly, I must admit that I had two very close calls, and lessons learned.
1. Never put the bike on it's center stand when you have the key in the side seat lock. Unknowingly, my leg was placed against the protruding key, and as I levered the bike back, I felt an unfamiliar pressure on the left knee. Looking down, i noticed I had just bent the key about 20 degrees! I couldn't believe it....Luckily, it bent back exactly how it was, and no issues thereafter.
2. Be aware of your surroundings! As I was unscrewing the old filter, for whatever reason, I'm trying to read some of the lettering on the filter. Why? I have no idea. But as my eyes wander upward, I realize my forehead is about 2 inches from a raging-hot header pipe; the bike had been running only a few minutes earlier. It wouldn't have taken much effort to lean forward a little, and that would have completely, thoroughly, absolutely, and positively ruined my day.
Anyway, thanks for the write-up folks, it was a big help