05-03-2013, 05:10 AM
Couple things I noticed on re- reading ( besides the spelling and grammatical errors) but cant seem to correct due to editing issues
First when adjusting the rear chain you'll also need a 27 mm wrench or socket and ratchet on left hand side to keep axle from turning
I should have mentioned the fuse puller should be in your tool kit bag
I also forgot to post torque spec for oil filter which was I believe is 19 ft lbs
Also once you've completed the service and run the bike for a few minutes go ack and check to make sure the drain plug and filter are not leaking.
And heres the pic that goes with measuring throttle play. I am using the metric side of the ruler and it shows throttle play at 4 mm ( spec 2-6 mm)
[url=http://smg.photobucket.com/user/theferret111/media/2013_05020008_zpsfbc371fd.jpg.html]![[Image: ac9ed565b2da2de1c5e2ea6b7d1b1e8f.jpg]](https://cb1100forum.net/forum/uploads/imp/201305/ac9ed565b2da2de1c5e2ea6b7d1b1e8f.jpg)
First when adjusting the rear chain you'll also need a 27 mm wrench or socket and ratchet on left hand side to keep axle from turning
I should have mentioned the fuse puller should be in your tool kit bag
I also forgot to post torque spec for oil filter which was I believe is 19 ft lbs
Also once you've completed the service and run the bike for a few minutes go ack and check to make sure the drain plug and filter are not leaking.
And heres the pic that goes with measuring throttle play. I am using the metric side of the ruler and it shows throttle play at 4 mm ( spec 2-6 mm)
[url=http://smg.photobucket.com/user/theferret111/media/2013_05020008_zpsfbc371fd.jpg.html]