Bush mechanic - a little Gravel Rash removed

[Pterodactyl_imp]

Fit the Staintune


G`day Pterodactyl, I see you have a Staintune fitted and wonder what clearance you have between the bottom shock absorber mounting bolt and the exhaust itself with no rider whilst on centre stand or sidestand. I had one sent through by my brother and the clearance seems minimal after comparing with the original unit which has a factory deformation in that area to allow a large clearance. Photo would be greatly appreciated.

Regards

Side stand


Centrestand

Clearance is about 5mm, by eye. If you want precise will measure tomorrow. When the suspension is working there should not be a problem. I have applied a deal of force and can't put the muffler against the suspension. I think you would have to have a severe drop for contact to occur. Monitoring of the mounting bushes should be part of routine checks. On the other hand if you want to remove the lower shock mounting bolt then the Staintune would have to be removed. Not a big deal. There are a number of members on the forum with Staintunes and no reported problems. If I can be of any further help let me know.

Cheers