01-06-2015, 10:55 AM
The handle bar risers have bolts that extend through the triple tree top clamp and then through rubber bushings held by a washer and nut. Early in the run of 13s, some complained about excessive handle bar vibration. I solved my issue by re torquing the bolts to 20 ft/lbs. You might try loosening those bar riser bolts up first and see if there is any play or wiggle room to reposition the bars on top of the upper triple tree clamp. Then re-tighten. Look up under the upper triple tree bracket and you will see what I am talking about.