03-19-2015, 11:16 PM
Trey it has sure seemed to work out that way. Even a guy 6'2 or so bought a Street Shield EX and wasn't happy until he cut it down to 11' and then was thinking about taking another inch off. After numerous threads it seems the guy with shields in the 8 1/2 to 10 inch range "above ignition" are the most satisfied with wind management. Either that or a shield so large that you have to look through like a Plexifairing 2.
see posts 25 and 33 but this whole thread is a good read
http://cb1100forum.com/forum/showthread....+Shield+EX
Mine started out at 17 1/2 above ignition, it's cut down to 13 1/4 ignition now (still too much noise) and I'm going to cut off another 3" I think.
see posts 25 and 33 but this whole thread is a good read
http://cb1100forum.com/forum/showthread....+Shield+EX
Mine started out at 17 1/2 above ignition, it's cut down to 13 1/4 ignition now (still too much noise) and I'm going to cut off another 3" I think.
