01-14-2018, 11:21 AM
On my 2014, if the run/stop is not in run position, the headlight goes out, but the starter will not operate.
Th w/bl wire from fuse C feeds the run/stop (and powers the BAS), which feeds the bl wire to (a) start button and (b) engine relay. The coil in the engine relay completes its circuit to ground via the r/o wire to the bank angle sensor.
Th w/bl wire from fuse C feeds the run/stop (and powers the BAS), which feeds the bl wire to (a) start button and (b) engine relay. The coil in the engine relay completes its circuit to ground via the r/o wire to the bank angle sensor.
