05-13-2015, 01:21 AM
(05-13-2015, 01:13 AM)Chapomis_imp Wrote: I received my 02 eliminator yesterday. So this morning before I went to meet ACKCB, I pulled the right-hand side-cover and found a 4 pin connector that matched it elim. Started the bike and rode to meet ACK. The sputtering seemed to still be there. What I didn't notice right away was that the spedo wasn't working and the ABS light was on..... We stopped in Sconset and "Thank Honda" for the right allen wrench in the "Tool Kit" and I pulled the cover to remove the Elim and ACK noticed that there were two 4 pin connectors, so we swapped it out. Same result ! No spedo and didn't go far enough to see if the sputtering had stopped. Removed the elim and all was back to normal. Does anyone have a repair manual for the DLX. Is it possible that there is another 4 pin somewhere ? Or maybe this just dosn't work on a DLX ?
Since you have two O2 Sensors, I would think that you need two Eliminator Plugs. Can you borrow a plug from someone to test?