06-04-2019, 10:09 AM
I had the cam cover off my 2014 Dlx to inspect the valve clearances. I had a really difficult time getting the cover off and out of the frame, but with the help of a friend, we did it. You have to carefully push all of the wires/ hoses out of the way. It went back on really easy.
The cylinder head cover bolt torque = 7 lbf-ft.
Front engine bracket nut = 36 lbf-ft
Front engine hanger nut, Rear engine bracket bolt, Rear upper engine hanger nut, Rear lower engine hanger nut = 44 lbf-ft
The cylinder head cover bolt torque = 7 lbf-ft.
Front engine bracket nut = 36 lbf-ft
Front engine hanger nut, Rear engine bracket bolt, Rear upper engine hanger nut, Rear lower engine hanger nut = 44 lbf-ft