06-23-2019, 11:48 PM
There are those that are way more experienced at this than I am. But I have modified a few bikes in my life. If I want it perfect take it to the shop after you have modified it. Pipe and Pods will require rejetting.
Now what I do for modern bikes is get the Dyno-Jet or 6 Sigma jet kit. I hate to say it but I prefer the 6 Sigma as they will give you Idle Jets in their kit. My last Dyno-Jet kit only had the Main Jet and needle.
Anyhow These kits can get you right where you need to be. If it still is not right take it to the professional. Like I said some I was very lucky to get right with the kits others I took in and the results were well worth it.
Now what I do for modern bikes is get the Dyno-Jet or 6 Sigma jet kit. I hate to say it but I prefer the 6 Sigma as they will give you Idle Jets in their kit. My last Dyno-Jet kit only had the Main Jet and needle.
Anyhow These kits can get you right where you need to be. If it still is not right take it to the professional. Like I said some I was very lucky to get right with the kits others I took in and the results were well worth it.