07-20-2019, 01:59 PM
Hi Alan,
I used an ABBA stand all the time on my CB. Great device and worked a treat.
I permanently removed those silver plastic covers, not my cup of tea.
I used an adapter that had a spigot and went into the centre of the swing arm shaft on one side and over the nut on the other. I’m not sure if this is what they recommend but it worked for me and I had those adapters available. There may be a better solution. Never failed me tho.
I also used it with the adapter to lift the bike by the footrest hangers, so I could remove the swing arm.
Ace contraption.![[Image: fcb9035bf1c7da4667a4dbfd45744f35.png]](https://cb1100forum.net/forum/uploads/imp/201907/fcb9035bf1c7da4667a4dbfd45744f35.png)
Sent from my iPhone using Tapatalk
I used an ABBA stand all the time on my CB. Great device and worked a treat.
I permanently removed those silver plastic covers, not my cup of tea.
I used an adapter that had a spigot and went into the centre of the swing arm shaft on one side and over the nut on the other. I’m not sure if this is what they recommend but it worked for me and I had those adapters available. There may be a better solution. Never failed me tho.
I also used it with the adapter to lift the bike by the footrest hangers, so I could remove the swing arm.
Ace contraption.
Sent from my iPhone using Tapatalk