09-06-2021, 02:50 AM
Good point about the front wheel, I will be doing that.
I was going to buy that red one pictured above in a post, good design with the turned up edge and looks strong enough but its listed as having a 220kg limit and the cb is around 250kg. Are they underestimating the weight for safety ?
Is it worth the risk I wonder.
Edit.... just been looking again and some sellers rate the same dolly as 300kg weight limit and one in Germany as 500kg.. why do they complicate things
[/quote]
I suspect that the weight limit is based on the caster load capacity. While the steel thickness is a little thin looking. at the very worst, it will start to sag, and you'll lose ground clearance. Nothing catastrophic.
I took a look at eBay UK, but found this from ConStands on Amazon UK:
https://www.amazon.co.uk/ConStands-Motor...B08GFZW9FL
It has a high load capacity due to double roller wheels, and the type of wheel lock works more easily than the individual locks at the casters.
I was going to buy that red one pictured above in a post, good design with the turned up edge and looks strong enough but its listed as having a 220kg limit and the cb is around 250kg. Are they underestimating the weight for safety ?
Is it worth the risk I wonder.
Edit.... just been looking again and some sellers rate the same dolly as 300kg weight limit and one in Germany as 500kg.. why do they complicate things
[/quote]
I suspect that the weight limit is based on the caster load capacity. While the steel thickness is a little thin looking. at the very worst, it will start to sag, and you'll lose ground clearance. Nothing catastrophic.
I took a look at eBay UK, but found this from ConStands on Amazon UK:
https://www.amazon.co.uk/ConStands-Motor...B08GFZW9FL
It has a high load capacity due to double roller wheels, and the type of wheel lock works more easily than the individual locks at the casters.