Posts: 2,590
Threads: 28
Likes Received: 6 in 2 posts
Likes Given: 0
Joined: Mar 2013
Heat works well. I just set mine out in the driveway on a 100+ degree day and they peeled right off. The residue will come off with a solvent. I was lazy and just dipped a cloth into the tank and it wiped right off.
Hopefully, with only 137 miles, it's spent the last 5 years in the garage. If so, you shouldn't have to worry too much about unfaded paint under the stickers.
Posts: 8,035
Threads: 21
Likes Received: 186 in 108 posts
Likes Given: 135
Joined: Apr 2025
And Cormanus is joking about the metal scraper. I did what Flynrider did and just used my finger nail. Since Summer is over you can use a hair dryer to heat them up. I used a WD-40 to remove the glue. Don’t use anything that would mess up paint.
Then some polish and done. THEN, RLETS install you must (Read that in Yoda’s voice)
Posts: 812
Threads: 39
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Aug 2015
(11-09-2018, 02:07 PM)Cormanus_imp Wrote: Personally I'd use a metal paint scraper. Other, more sophisticated forum members would use a hair dryer to melt the glue and then peel them off gently. There is a risk the rest of the paint on the tank may have faded so you'll see brighter spots where the labels were.
Posts: 11
Threads: 1
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Sep 2018
FYI... Mine is #1325, mfg date 03/13
So... I successfully removed TANK LABELS with my wife's hair dryer and WD-40, but...
The paint is MUCH darker under the labels!!! BUMMER!
Here's my VIN...
Posts: 23,431
Threads: 697
Likes Received: 511 in 233 posts
Likes Given: 671
Joined: Apr 2025
wow that is a huge difference in color.
Posts: 3,881
Threads: 115
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Apr 2013
Where was the bike stored ? Outside ?
Posts: 16,210
Threads: 344
Likes Received: 756 in 419 posts
Likes Given: 889
Joined: Apr 2025
That is a bummer, 96gears.
I’ve taken the liberty of adding your VIN to the forum register.
Posts: 1,267
Threads: 108
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Feb 2015
Not problem. Buy a generic tank protector that applies to the tank with adhesive and cover that up. Problem solved.
Posts: 42
Threads: 8
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Mar 2018
congrats 96 on the bike,
to my understanding that discoloration on your fuel tank that's only a clear coat what is changed,and hopefully just upper surface,not a red base,
talk to your local,friendly body shop,very gentle sanding with water 1000-2000 sandpaper and polishing,buffeting and waxing and waxing and waxing might solve a problem,HOWEVER if you have never done it before,DON'T do it,please,first time on that fuel tank.you can always get a fender from a junk yard and try it.
Posts: 2,590
Threads: 28
Likes Received: 6 in 2 posts
Likes Given: 0
Joined: Mar 2013
(11-10-2018, 07:56 AM)Houtman_imp Wrote: Where was the bike stored ? Outside ?
I'd think it would have had to have spent some time outside. Hard to imagine that much fading without some UV rays being involved.
One other fix might be to put the stickers back on.