Login

spartanheed_imp · 02-21-2019, 05:11 PM

(02-21-2019, 05:02 PM)DBM_imp Wrote:
(02-15-2019, 08:53 AM)jimgl3_imp Wrote: pull the end cap off. drill about 8 1/4" holes. replace end cap. nice deep rumble.

Yup. I drilled several 5/8" holes in the end plate, cut off the snooter pipe, painted the inside end plate with flat black heat paint, and used black high heat RTV sealant when l put the end cap back on. Results are better throttle responce with a nice deep rumble but not too loud. Price was right.

Yup. I drilled several 5/8" holes in the end plate, cut off the snooter pipe, painted the inside end plate with flat black heat paint, and used black high heat RTV sealant when l put the end cap back on. Results are better throttle responce with a nice deep rumble but not too loud. Price was right.
Any pictures please?

And what was the purpose of painting the inside of the end cap?

DBM_imp · 02-23-2019, 08:50 AM

(02-21-2019, 05:11 PM)spartanheed_imp Wrote:
(02-21-2019, 05:02 PM)DBM_imp Wrote:
(02-15-2019, 08:53 AM)jimgl3_imp Wrote: pull the end cap off. drill about 8 1/4" holes. replace end cap. nice deep rumble.

Yup. I drilled several 5/8" holes in the end plate, cut off the snooter pipe, painted the inside end plate with flat black heat paint, and used black high heat RTV sealant when l put the end cap back on. Results are better throttle responce with a nice deep rumble but not too loud. Price was right.

Yup. I drilled several 5/8" holes in the end plate, cut off the snooter pipe, painted the inside end plate with flat black heat paint, and used black high heat RTV sealant when l put the end cap back on. Results are better throttle responce with a nice deep rumble but not too loud. Price was right.
Any pictures please?

And what was the purpose of painting the inside of the end cap?

Yup. I drilled several 5/8" holes in the end plate, cut off the snooter pipe, painted the inside end plate with flat black heat paint, and used black high heat RTV sealant when l put the end cap back on. Results are better throttle responce with a nice deep rumble but not too loud. Price was right.
Any pictures please?

And what was the purpose of painting the inside of the end cap? Sorry no pics. When you cut off the snooter pipe, you can see inside the muffler and the drilled end plate. I painted the end plate to hide the bare metal from the drilled holes.

Honda_Fan_imp · 02-23-2019, 09:52 AM

(02-20-2019, 10:51 AM)Ferrealls_imp Wrote: I have a two bros M2 that I love. It's a little shorter than the delkevic.

What fender kit is that? Never mind just saw breakdown in your signature on

spartanheed_imp · 02-24-2019, 07:26 AM

(02-15-2019, 08:53 AM)jimgl3_imp Wrote: pull the end cap off. drill about 8 1/4" holes. replace end cap. nice deep rumble.

Drill holes where? Through the end cap or through the metal plate inside the end cap, a few inches down the pipe?

Drill holes where? Through the end cap or through the metal plate inside the end cap, a few inches down the pipe?
Ignore that, I've found another thread which explains

spartanheed_imp · 02-26-2019, 04:16 AM

Done today.

Not the cleanest job but definitely sounds better. Used a dremel cutting disc and a drill with a 1/2 bit

[url=http://smg.photobucket.com/user/spartanheed/media/IMG_20190226_174503_zps0jcairfj.jpg.html] [Image: 1f9110f6ffbce30e830b4af0fa4a2163.jpg]

[Image: 1f9110f6ffbce30e830b4af0fa4a2163.jpg]

[url=http://smg.photobucket.com/user/spartanheed/media/IMG_20190226_181021_zpshfxyn4cn.jpg.html] [Image: 6b8ea45bc872d9dbd386b8f3666e131f.jpg]

Honda_Fan_imp · 02-26-2019, 05:56 AM

I believe obligatory sound clip is required

Frulk_imp · 02-26-2019, 06:16 AM

Off topic but Peter asked about my seat earlier in this thread and just now caught that. It’s a K and H from Samurider. Bought off Member Lola on this forum. Vinyl. Can be custom ordered for height/weight/cover/seating surface etc. although I’m prob heavier than previous owner the seat is all day comfortable as it is.

thebrawnyman_imp · 02-26-2019, 06:26 AM

(02-26-2019, 04:16 AM)spartanheed_imp Wrote: Done today.

Not the cleanest job but definitely sounds better. Used a dremel cutting disc and a drill with a 1/2 bit

[url=http://smg.photobucket.com/user/spartanheed/media/IMG_20190226_174503_zps0jcairfj.jpg.html]

[url=http://smg.photobucket.com/user/spartanheed/media/IMG_20190226_181021_zpshfxyn4cn.jpg.html]

Will this slight difference have adverse effects to horsepower? Or cause the fuel map to run lean? Interesting to know how it felt riding after, if you noticed any "pickup" differences.

spartanheed_imp · 02-26-2019, 07:03 AM

No idea. There was a thread on here years ago with lots of people doing the same and no one complained

Bheezy27403_imp · 02-26-2019, 07:04 AM

Any gains or loses from this will be minimal.If you could tell a difference I would give you $20. The ecu will adapt to the small change.

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	need help installing slip on exhaust nw suburb, IL	jm0327_imp	18	1,332	10-25-2024, 12:12 PM Last Post: iamheero_imp
	Exhaust system/slip-on	johnny_elpino_imp	26	1,744	05-26-2023, 01:06 AM Last Post: kzoorue_imp
	Arrow Slip-On Thoughts	le_penseur_imp	84	4,127	05-15-2023, 05:20 AM Last Post: mrded_imp
	delkevik slip on mufflers	outback_imp	4	471	10-14-2021, 12:44 AM Last Post: outback_imp
	Delkevic Muffler slip-on	wgscheib_imp	2	303	06-08-2021, 01:48 AM Last Post: GoldOxide_imp
	Arrow slip on mufflers	DougsZ28_imp	15	1,035	05-13-2021, 04:09 AM Last Post: PowerDubs_imp
	Over racing slip on	spartanheed_imp	7	634	07-05-2020, 08:33 AM Last Post: Cobalt23_imp
	Busso Slip-On and DLX Seat	Cobalt23_imp	15	847	07-02-2020, 07:51 AM Last Post: Cobalt23_imp
	Arrow slip on, amazing!	Kawiboy_imp	72	3,346	05-27-2018, 07:48 PM Last Post: VAslim16_imp
	Yoshimura RS 3 Signature slip on exhaust	Derby Joe_imp	3	288	05-15-2018, 02:45 AM Last Post: PowerDubs_imp

Threaded Mode Slip on exhaust
Author	Message