Login

2014ltdltz · 05-19-2022, 11:35 PM

Anyone modify an OEM CB1100 seat? Not asking about swap to aftermarket. Anyone have one re-foamed? Just curious.

pekingduck · 05-20-2022, 04:08 AM

(05-19-2022, 11:35 PM)2014ltdltz_imp Wrote: Anyone modify an OEM CB1100 seat? Not asking about swap to aftermarket. Anyone have one re-foamed? Just curious.

Not sure you want to go higher or lower, but here are a couple links that may answer your questions.

http://cb1100forum.com/forum/showthread....light=seat

http://cb1100forum.com/forum/showthread....light=seat

http://cb1100forum.com/forum/showthread....light=seat

http://cb1100forum.com/forum/showthread....light=seat

Gone in 60 · 05-20-2022, 08:05 AM

I had mine redone at a local upholstery shop. He added a thin layer of foam to the top along with changing the pattern. It's more comfortable for me and just a tad taller ovearall.

Ben70_imp · 05-20-2022, 09:56 AM

Hi 2014... I also had my seat redone to try for a little more wiggle room. Eventually got an aftermarket seat but the real fix was a new hip.
Don't know what you are after but you can have this for $50 plus shipping. The pan alone is probably worth that if you want to customize. It's from a '13, same as '14.
If you are not interested I will put it in the for sale section.

Ben

Charlie Bravo_imp · 05-21-2022, 01:40 AM

I like the CB, but it is my city bike, and two hours on it's plank-like seat will start to give me tingles and cramps. That's why I have a long-legged runner Suzi DL1000. That seat is comfy all day! Back when I had the Sportster 1200, I had a local upholstery shop add some foam into its seat. It improved it somewhat, but I still ended up selling it to get a more comfortable distance runner better for two-up riding, but the two-up never happened, so sold that one, too,

Delphisa · 07-05-2022, 01:56 AM

The original seat of the CB1100 is not so bad, but eventually I decided to make it improved, by a local upholstery, a few miles from my home. With about 1 inch added rubber foam, comfort is really improved, especially at rear place. The cost is 300 euros for a basic modification as I was looking for. With some supplements it was possible to have some more aesthetic features (red stitching, anti-slip top cover...) but I preferred to stay on a very classical shape.
A few pictures:

Comparison before/after:

Tested last Sunday on a 200 miles ride: Thumbs Up

GoldOxide_imp · 07-05-2022, 04:41 AM

The looks are good Delphisa.

Nachodaddy · 07-05-2022, 05:56 AM

Very nice Delphisa. congratulations!

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Gauge Mods	Seancampbell777_imp	11	797	10-16-2024, 04:14 AM Last Post: Gone in 60
	Honda Seats ↓	milkmaster_imp	9	595	06-15-2023, 12:49 AM Last Post: Nachodaddy
	Short mods list and experience with each for those considering.	Motomike7_imp	6	473	04-07-2023, 11:34 PM Last Post: 1973cb750
	2 small mods until the weather changes	inditx_imp	10	757	01-02-2023, 10:31 AM Last Post: inditx_imp
	Best suspension mods?	gretle_2.0	6	426	05-10-2022, 06:25 AM Last Post: Tev62
	Winter Mods finished, time to ride!	Phadreus_imp	3	363	05-02-2022, 10:08 PM Last Post: Phadreus_imp
	Whitehouse K17 mods...	Bazbro_imp	390	15,988	04-30-2022, 12:50 PM Last Post: Bazbro_imp
	Mods Mods Mods	Latinrudeboi13_imp	12	755	08-23-2021, 01:11 PM Last Post: Rox_imp
	Corbin seats vs. K&H? which one is better	misterprofessionality	0	173	05-29-2020, 07:36 AM Last Post: misterprofessionality
	Mr.P's CB mods, mark II	misterprofessionality	18	975	05-21-2020, 06:45 PM Last Post: Cormanus

Threaded Mode Mods to OEM seats?
Author	Message