Login

CRush_imp · 04-25-2021, 01:27 PM

(04-24-2021, 08:26 AM)olafurarason_imp Wrote: Puig.

Which Puig model is that? It looks decent and seems like it might be big enough to actually do some good at speed. How do you like it in terms of airflow?

CRush_imp · 04-25-2021, 02:11 PM

[Image: 14097e1d124991e16fa21db9648d514d.jpg?1]

I recently put on this EMGO Viper fairing on my 2013, and I like the way it looks, but it sucks at speed. I'm not a huge fan of the aesthetics of the venom fairing, as I'd rather the headlight hole stay round, but I can see how it would do a better job of deflecting air. With the viper, the top of the windscreen is pretty much parallel to the ground, so instead of throwing the air up higher, it comes straight over it. From what i've seen on other posts here, it seems like the road comet 2 is a good way to go, but man, they're expensive. I'm curious what's worked well for others. I'm 6' 0" and in an ideal world, the air would hit me at my shoulders.

GoldOxide_imp · 04-25-2021, 11:11 PM

Hey CRush! - Welcome to the CB1100 Forum!

I used a Dart Marlin screen, not nearly as sophisticated, but was useful up to about 120 km/h for no more than 50% relief.

NHCB1100_imp · 04-25-2021, 11:44 PM

(04-25-2021, 11:11 PM)GoldOxide_imp Wrote: Hey CRush! - Welcome to the CB1100 Forum!

I used a Dart Marlin screen, not nearly as sophisticated, but was useful up to about 120 km/h for no more than 50% relief.

I use a street shield ex with 3 inches or so cut off the top. I’m 6’1” and it works well.

mvk24_imp · 04-26-2021, 12:30 AM

(04-25-2021, 02:11 PM)CRush_imp Wrote:
I recently put on this EMGO Viper fairing on my 2013, and I like the way it looks, but it sucks at speed. I'm not a huge fan of the aesthetics of the venom fairing, as I'd rather the headlight hole stay round, but I can see how it would do a better job of deflecting air. With the viper, the top of the windscreen is pretty much parallel to the ground, so instead of throwing the air up higher, it comes straight over it. From what i've seen on other posts here, it seems like the road comet 2 is a good way to go, but man, they're expensive. I'm curious what's worked well for others. I'm 6' 0" and in an ideal world, the air would hit me at my shoulders.

How was the install?

I have the Emgo Venom ll and it took a little alteration with a dremel. Not hard to do just tedious to get it right. But now it will come on and off with little effort. Have to remember I have spacers between the fairing and the headlight bucket though before they fall lol.

Sent from my SM-G965U1 using Tapatalk
[Image: af2a4b7b5d61811fea7463c6e63ef106.jpg]

[Image: af2a4b7b5d61811fea7463c6e63ef106.jpg]

[Image: 97f6597b51d021c669fd7b86d8181456.jpg]

[Image: ab3bdd3b2b3ae980bf8e386293c88222.jpg]

[Image: 93b580149ac174fb7a61ea64759e1b03.jpg]

[Image: 476eab2d1281d6d3a715b6a2f9a259ab.jpg]

CRush_imp · 04-26-2021, 09:07 AM

(04-26-2021, 12:30 AM)mvk24_imp Wrote:
(04-25-2021, 02:11 PM)CRush_imp Wrote:
I recently put on this EMGO Viper fairing on my 2013, and I like the way it looks, but it sucks at speed. I'm not a huge fan of the aesthetics of the venom fairing, as I'd rather the headlight hole stay round, but I can see how it would do a better job of deflecting air. With the viper, the top of the windscreen is pretty much parallel to the ground, so instead of throwing the air up higher, it comes straight over it. From what i've seen on other posts here, it seems like the road comet 2 is a good way to go, but man, they're expensive. I'm curious what's worked well for others. I'm 6' 0" and in an ideal world, the air would hit me at my shoulders.
How was the install?

I have the Emgo Venom ll and it took a little alteration with a dremel. Not hard to do just tedious to get it right. But now it will come on and off with little effort. Have to remember I have spacers between the fairing and the headlight bucket though before they fall lol.

Sent from my SM-G965U1 using Tapatalk

How was the install?

I have the Emgo Venom ll and it took a little alteration with a dremel. Not hard to do just tedious to get it right. But now it will come on and off with little effort. Have to remember I have spacers between the fairing and the headlight bucket though before they fall lol.

Sent from my SM-G965U1 using Tapatalk
[Image: 4b4667783819b0e87927a59c44b46cfc.jpg]

[Image: 4b4667783819b0e87927a59c44b46cfc.jpg]

[Image: 4d5f91da93f00135e979473f92040ed9.jpg]

[Image: feeaebec7967d4263b4d1fb640c183b2.jpg]

[Image: 58f96329647e6adde44ea73f34754bf4.jpg]

[Image: 2c5e2dfce3be0e6600087fd96af32277.jpg]

The install was actually quite easy. the brackets it came with slid onto the headlight bolts with no problem. That might not be the case with the original headlight brackets though. Mine came with a dart marlin installed, and I hear those brackets come forward an inch or so from the original, which were not included.

mvk24_imp · 04-26-2021, 11:59 AM

(04-26-2021, 09:07 AM)CRush_imp Wrote:
(04-26-2021, 12:30 AM)mvk24_imp Wrote:
(04-25-2021, 02:11 PM)CRush_imp Wrote:
I recently put on this EMGO Viper fairing on my 2013, and I like the way it looks, but it sucks at speed. I'm not a huge fan of the aesthetics of the venom fairing, as I'd rather the headlight hole stay round, but I can see how it would do a better job of deflecting air. With the viper, the top of the windscreen is pretty much parallel to the ground, so instead of throwing the air up higher, it comes straight over it. From what i've seen on other posts here, it seems like the road comet 2 is a good way to go, but man, they're expensive. I'm curious what's worked well for others. I'm 6' 0" and in an ideal world, the air would hit me at my shoulders.
How was the install?

I have the Emgo Venom ll and it took a little alteration with a dremel. Not hard to do just tedious to get it right. But now it will come on and off with little effort. Have to remember I have spacers between the fairing and the headlight bucket though before they fall lol.

Sent from my SM-G965U1 using Tapatalk

How was the install?

I have the Emgo Venom ll and it took a little alteration with a dremel. Not hard to do just tedious to get it right. But now it will come on and off with little effort. Have to remember I have spacers between the fairing and the headlight bucket though before they fall lol.

Sent from my SM-G965U1 using Tapatalk
The install was actually quite easy. the brackets it came with slid onto the headlight bolts with no problem. That might not be the case with the original headlight brackets though. Mine came with a dart marlin installed, and I hear those brackets come forward an inch or so from the original, which were not included.

How was the install?

I have the Emgo Venom ll and it took a little alteration with a dremel. Not hard to do just tedious to get it right. But now it will come on and off with little effort. Have to remember I have spacers between the fairing and the headlight bucket though before they fall lol.

Sent from my SM-G965U1 using Tapatalk
[Image: 5078b34823fcc50ede75581fd1232631.jpg]

[Image: 5078b34823fcc50ede75581fd1232631.jpg]

[Image: c56a89a0e58feb55aad1abafe8887472.jpg]

[Image: 969efd4b2c3f2d531ecd91a8c939eba6.jpg]

[Image: d2d39b06036616382f4d11608fc5eb3f.jpg]

[Image: cd2235a6a7d0389bd0135a0904c3c111.jpg]

The install was actually quite easy. the brackets it came with slid onto the headlight bolts with no problem. That might not be the case with the original headlight brackets though. Mine came with a dart marlin installed, and I hear those brackets come forward an inch or so from the original, which were not included. Yes, those brackets are a little more forwards like you said. In that case I may not have had to trim mine. I probably had to trim about an inch at the center diameter (I did a rounded cut) to clear the turn signals

Sent from my SM-G965U1 using Tapatalk

Enzofour_imp · 04-28-2021, 05:43 PM

Here is from Puig, special offer http://www.louis.de, € 40 Smile

Tev62 · 04-28-2021, 07:14 PM

(04-28-2021, 05:43 PM)Enzofour_imp Wrote: Here is from Puig, special offer http://www.louis.de, € 40

Nice find, I see they also do a mini screen, now on sale at €19.99! I think I will buy one just to have as an option.

Not my style but the handlebar fairing looks quite decent if that's your thing.

Chiggie_imp · 04-28-2021, 09:33 PM

My Givi A660 arrived this morning. I will post a few pics, notes on assembly, fitting and how well it performs.

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Front fender options	Azika_imp	29	3,252	11-17-2022, 02:52 PM Last Post: Azika_imp
	Tank Guard Options	Yata-Garasu_imp	11	694	05-18-2022, 08:11 AM Last Post: Lord Popgun
	Puig Vision Windscreen	Interceptor Pilot_imp	5	523	03-03-2022, 08:39 AM Last Post: GoldOxide_imp
	Luggage Rack Options	Yata-Garasu_imp	25	2,283	11-27-2021, 02:13 PM Last Post: GoldOxide_imp
	Handle Grip Options	Yata-Garasu_imp	24	1,691	10-26-2021, 11:28 AM Last Post: rboe
	Givi AF49 Airflow Universal Windscreen	binarkansas_imp	3	379	09-23-2021, 07:02 AM Last Post: LikeAfox_imp
	Fenders and windscreen	motorider6_imp	3	417	11-28-2020, 03:39 AM Last Post: motorider6_imp
	Interesting Helmet light options	satchit	1	314	06-21-2020, 02:59 AM Last Post: peterbaron
	Puig Windscreen Quality	Skypilot_imp	13	885	11-01-2019, 11:43 AM Last Post: MWV1500_imp
	New Windscreen	Ben70_imp	10	825	09-17-2019, 04:06 PM Last Post: Cormanus

Threaded Mode Windscreen Options?
Author	Message