Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Just bought 83' CB1100F for $200
#1
Well... I know essentially nothing about CB1100F's beside what I read off of Wiki and a few quick google searches, so bare with me...

I buy & sell motorcycles/cars for a living (own a small pre-owned lot in Oceanside, CA) and this Saturday I went to go buy a KTM 450EXC Dual Sport for next to nothing in Huntington Beach. As I walk up this guys drive way I notice he has about a 4 bedroom house worth of furniture and miscellaneous items laid out front like a garage sale. Next to the KTM is this red/white nighthawk looking thing that I paid virtually no attention to until I loaded up the KTM and was about 10 seconds from going on my way. I asked him what that bike was and what he wanted for it, "It's a 1983 Honda CB1100F," he says, "they only made them for one year". Unknowly what this thing was worth, I asked what he wanted for it, he replied $300 should do it, I have the pink in hand, but the tags are out since 2012. I offered him $150 thinking it had to be worth 4 times that in parts alone for my ebay business. He said $200 and its yours. 5 minutes later, I'm short $200 bucks and a new owner of a 1983 CB1100F.

A day rolls by and I start realizing the following these bikes have and how much they are potentially worth. This bike doesn't not currently run, but turns over freely (carbs have been removed for cleaning and will need to be synced, which my mechanic can handling for a mere $150, everything is there. It will need your typical items like tires, fluids flushed, battery, Etc. but the bike looks to be in really good shape, there are a few things that could use powder coating (rims, headers, a couple trim pieces, but it's all there (even the front cowl fairing). Has an aftermarket ignition, coils/wires, Vance Hines Exhaust, and 33k miles on the odometer, but the guy had a 2 inch thick stack of service records which state he spent $2900 rebuilding the motor less than 1k miles ago. I guess my question is, what is the best route from here? I've been dying to build a badass dirt/street tracker style motorcycle, but I wouldn't want to diminish the value of an original bike if there is too muc value to lose. Should I get it running and turn it? Build it into a badass cafe or street tracker for myself? Or should I restore it as original as possible before turning it? I'd love your guy's input because like I said, I know virtually nothing about these legends. Thanks!
Reply
#2
If the $$$ doesn't add up to quickly on parts and labor I'd be inclined to at least get it up and running. Your CA climate should of been nice to it.
Reply
#3
oh don't chop it up, It's in amazing condition from what I can see, Restore restore, Restore!
Those are the best of the 80's Cb's IMO, the 1100 was a one year bike. If you have the stock airbox still, put it back on! the bike will almost never run as well as with it.
Reply
#4
Yes I have a ton of parts w/ it including the Airbox, Carbs, Cowl Fairing, Side Panels, etc. it's in pretty good shape for a 30+ year old motorcycle. Small touches here and there would go a long way. I'm definitely going to get it running first and assess the situation from there. If it's as simple as carb cleaning, syncing, and tuning then I'll be much more inclined to spend some more one it.
Reply
#5
Nice find!
Reply
#6
(06-07-2015, 11:19 PM)jazzmans_imp Wrote: oh don't chop it up, It's in amazing condition from what I can see, Restore restore, Restore!
Those are the best of the 80's Cb's IMO, the 1100 was a one year bike. If you have the stock airbox still, put it back on! the bike will almost never run as well as with it.

+1, do restore this beauty.
Reply
#7
Look up soaking the carbs in pine sol to clean them. There is a big following with it and it seems to work very well.
Reply
#8
Here's some more pics w/ the fairings on it, I have about 2 boxes of extra parts (OEM & aftermarket), spares, etc. so I should have everything I need to get it running and rolling, but I will have to do fork seals & bushings, brake pads, etc. to make it a daily. How hard is it to come by parts since it's only a 1 year model?
Reply
#9
what a beauty in the rough !

restoring that to as near stock as possible is what I would do..
it would make the right people all misty eyed...
Reply
#10
That is an awesome find.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Bought "another bike" to keep the CB company E11even_Hunnit 7 558 06-05-2021, 10:07 PM
Last Post: GoldOxide_imp
  My brother just bought a 2020 Zero S pdedse 22 1,298 10-21-2019, 02:52 AM
Last Post: GoldOxide_imp
  I Bought a Royal Enfield Paris_imp 69 3,711 10-15-2019, 01:50 AM
Last Post: GoldOxide_imp
  So..I bought a vintage Honda today... VTR1000F_imp 30 1,487 11-27-2018, 01:57 PM
Last Post: GoldOxide_imp
  Tink bought a ... Yamaha WR250R Dual Sport Bike TINK_imp 10 644 08-17-2017, 11:25 AM
Last Post: Desert viper_imp
  almost bought a Harley use2b_imp 19 1,024 04-14-2017, 02:55 AM
Last Post: dwcurton_imp
  '83 CB1100F Resto-Mod grover_imp 4 349 07-24-2015, 09:47 AM
Last Post: Pterodactyl_imp
  Value of 1983 honda cb1100f? orangegaga_imp 11 886 07-05-2013, 08:25 AM
Last Post: PowderToastMan_imp

Forum Jump:


Users browsing this thread: 1 Guest(s)