Posts: 6,967
Threads: 93
Likes Received: 418 in 235 posts
Likes Given: 830
Joined: Apr 2025
Need dimensions of 2017 EX "HONDA" tank emblem .
Hight x length in inches or centimeters, also if side/surface facing tank is slightly concave or flat.
Close range angle pic of >H or A< to see letter shape facing tank would be more than welcome
Thanx all who responded
Posts: 401
Threads: 7
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Mar 2015
Peter...I have silver CBX tank emblems.....6 1/4” Long....flat with 2 mounting holes.....and I have white, slightly curved emblems with stems that have to be ground off..6 3/4” part # 87121-341-000 both would be mounted with 2 sided tape
Height is 1”
Peter 2017 emblems are 160mm (6.2”)....86171-MGC-JDO AND 86172-MGC-JDO
These were put on with double sided tape
Posts: 12,677
Threads: 77
Likes Received: 3 in 3 posts
Likes Given: 0
Joined: Dec 2014
(12-30-2018, 06:53 AM)peterbaron_imp Wrote: Need dimensions of 2017 EX "HONDA" tank emblem .
Hight x length in inches or centimeters, also if side/surface facing tank is slightly concave or flat.
Close range angle pic of >H or A< to see letter shape facing tank would be more than welcome
Thanx all who responded
If I had to guess PB I'd say you were about to 3D print sumthin'.
Posts: 384
Threads: 27
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Nov 2015
DesertViper...
thx for the pics w/ honda partnumbers...
question; the gold stripe on the black tank...
was that painted on, or is that a decal w/ a Honda part number?
(12-30-2018, 08:47 AM)Desert viper_imp Wrote: Peter...I have silver CBX tank emblems.....6 1/4” Long....flat with 2 mounting holes.....and I have white, slightly curved emblems with stems that have to be ground off..6 3/4” part # 87121-341-000 both would be mounted with 2 sided tape
Height is 1”
Peter 2017 emblems are 160mm (6.2”)....86171-MGC-JDO AND 86172-MGC-JDO
These were put on with double sided tape
Posts: 6,967
Threads: 93
Likes Received: 418 in 235 posts
Likes Given: 830
Joined: Apr 2025
(12-30-2018, 08:47 AM)Desert viper_imp Wrote: Peter...I have silver CBX tank emblems.....6 1/4” Long....flat with 2 mounting holes.....and I have white, slightly curved emblems with stems that have to be ground off..6 3/4” part # 87121-341-000 both would be mounted with 2 sided tape
Height is 1”
Peter 2017 emblems are 160mm (6.2”)....86171-MGC-JDO AND 86172-MGC-JDO
These were put on with double sided tape
Dv, can you place the white emblem and its reverse/black side on a white piece of paper (my tank is white) and post its pics, please. ..
Tx for your info so far
Posts: 12,677
Threads: 77
Likes Received: 3 in 3 posts
Likes Given: 0
Joined: Dec 2014
DV: Are you using 3M VHB ribbon adhesive? If so, the grey foam-based or black?
Posts: 401
Threads: 7
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Mar 2015
Hi guys.....the tank is another members......the painter hand paints the stripes.....as for the double sided tape I really don’t know what they used....yes Peter I will take pics tomorrow on a white sheet of paper......heading out now for a party......Peter I think black Honda letters would look sharp with your white tank with a black stripe at the top of the tank.....I’m picturing it now in my head....
These letters
Posts: 12,677
Threads: 77
Likes Received: 3 in 3 posts
Likes Given: 0
Joined: Dec 2014
(12-31-2018, 07:30 AM)Desert viper_imp Wrote: Hi guys.....the tank is another members......the painter hand paints the stripes.....as for the double sided tape I really don’t know what they used....yes Peter I will take pics tomorrow on a white sheet of paper......heading out now for a party......Peter I think black Honda letters would look sharp with your white tank with a black stripe at the top of the tank.....I’m picturing it now in my head....
These letters
Classy DV. Very much British inspired.
Posts: 401
Threads: 7
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Mar 2015
Posts: 401
Threads: 7
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Mar 2015
