Login

pekingduck · 04-23-2022, 03:11 AM

I don't know the shape and dimensions of the quick-disconnect mount for the box, but I assume it approximates the shape of the rack. You have a rack, a box , and it's mounting plate.

The problem is the mounting plate holes do not align with the holes on your rack. Is there any way to drill holes into the mounting plate that will align?

Can anyone provide a picture of their mounting plate on the rack without the box?

At the very worst, you would have to make an interim mounting plate, that bolts to your rack, and has holes in the right place for the trunk mounting plate.

Lord Popgun · 04-23-2022, 03:25 AM

If the key lock assm is not assembled yet and you have the kit for it, it is very east to set up. We have the instructions (translated to English) with pics on the board.

GoldOxide_imp · 04-23-2022, 03:46 AM

Most [universal] adapter plates come with clamp parts that allows the owner to bypass rack hole alignment (or some of them) and simply clamp down the plate with provided bolts and nylon lined nuts. The top box then just klinks and unklinks to the adapter plate.

Nachodaddy · 04-23-2022, 05:10 AM

(04-23-2022, 03:11 AM)pekingduck_imp Wrote: I don't know the shape and dimensions of the quick-disconnect mount for the box, but I assume it approximates the shape of the rack. You have a rack, a box , and it's mounting plate.

The problem is the mounting plate holes do not align with the holes on your rack. Is there any way to drill holes into the mounting plate that will align?

Can anyone provide a picture of their mounting plate on the rack without the box?

At the very worst, you would have to make an interim mounting plate, that bolts to your rack, and has holes in the right place for the trunk mounting plate.

Thanks, but I tried everything. The holes in the mounting plate end up over some part of the rack, no matter how you turn it. Easier to just use the universal mounting kit. Not as pretty, but, like the box, it is functional.

Tbhart89_imp · 06-21-2023, 08:51 PM

Thanks for the key instructions, ill try that this weekend. I have the proper rack and mounting bracket also and still don't know how to install it. Anyone have mounting instructions for the bracket? Thanks!

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	SW-Motech Top Case (All CB1100 Models)	rdprdp01	2	441	08-20-2025, 06:25 AM Last Post: Lord Popgun
	Crank Case Cover removal?	JF Coastal_imp	47	2,526	08-04-2023, 01:26 PM Last Post: Cormanus
	Recommend a cover?	jikemenkins	5	437	05-25-2023, 03:47 AM Last Post: GoldOxide_imp
	Honda top case install	Jonnyteabag_imp	11	757	12-31-2021, 09:22 AM Last Post: Jonnyteabag_imp
	Givi SR1118 Top Case Rack	active1951_imp	4	422	06-28-2021, 07:08 AM Last Post: Tom_imp
	Apache 4800 top box. (HF/Pelican case)	mvk24_imp	12	740	04-16-2021, 04:01 AM Last Post: the Ferret
	Givi Side Case Racks...Do they exist?	cbolling_imp	21	1,032	08-28-2020, 08:34 PM Last Post: peterbaron
	HELP! OEM Top Box/ wrong rear Carrier? 13' CB	iamlegend21087_imp	4	388	05-12-2020, 09:16 PM Last Post: Lord Popgun
	Case paint - need a suggestion to match stock	skidmarkart_imp	15	669	03-16-2020, 08:20 PM Last Post: FLYTYM_imp
	Stripping black finish off of 2017 engine case and cylinders	Greaseball_imp	9	617	09-12-2019, 09:59 AM Last Post: pekingduck

Threaded Mode Anyone recommend s a top case for the 13' OEM rear Carrier?
Author	Message