Tank Pad

[bflint]

Does anyone have the Honda (or aftermarket) tank protection pad installed? If so, can you provide a photo? I'm not necessarily a fan of them, but I want to avoid the jacket scratches on the tank that are so common...the CB tank is too beautiful to mark up! Greatly appreciate any photos.

Have a look at these:- Basically clear film but already cut to shape / size, and I'm very happy with the result! http://thetankslapper.biz/osc/index.php?cPath=25_1229

Have a look at these:- Basically clear film but already cut to shape / size, and I'm very happy with the result! http://thetankslapper.biz/osc/index.php?cPath=25_1229 **
I am buying the "thetankslapper" kit it for the CB1100. Additionally, the "thetankslapper" is in my area so I rode up and talked to the owner because I wanted some additional protection (a) on the front of my tank from bugs/roadcrud, and (b) between my custom Corbin seat and the tank (the seat is deglossing the paint). He measured my 2014 Deluxe tank and made additional patterns from it. He made/installed the extra seat protection at his shop, but I have to wait until next week to order the bugs/roadcrud protection.

[activedirt_imp]

Does anyone have the Honda (or aftermarket) tank protection pad installed? If so, can you provide a photo? I'm not necessarily a fan of them, but I want to avoid the jacket scratches on the tank that are so common...the CB tank is too beautiful to mark up! Greatly appreciate any photos.

Have a look at these:- Basically clear film but already cut to shape / size, and I'm very happy with the result! http://thetankslapper.biz/osc/index.php?cPath=25_1229

Have a look at these:- Basically clear film but already cut to shape / size, and I'm very happy with the result! http://thetankslapper.biz/osc/index.php?cPath=25_1229 **
I am buying the "thetankslapper" kit it for the CB1100. Additionally, the "thetankslapper" is in my area so I rode up and talked to the owner because I wanted some additional protection (a) on the front of my tank from bugs/roadcrud, and (b) between my custom Corbin seat and the tank (the seat is deglossing the paint). He measured my 2014 Deluxe tank and made additional patterns from it. He made/installed the extra seat protection at his shop, but I have to wait until next week to order the bugs/roadcrud protection.

Their website makes it appear that this 'tank slapper' is red in color or is it clear? Also they have a selection of film types, so whick type did you select:

[url=https://thetankslapper.biz/oc/index.php?route=product/product&product_id=409&search=]https://thetankslapper.biz/oc/index.php?...09&search=

[Lord Popgun]

I put it on my bike. It is clear. The red is so you can see it on the computer screen. Otherwise, you wouldn't see anything!

[activedirt_imp]

One more option: using a spray-on plastic film called 3M Paint Defender.

It's more effort to use than applying a pre-cut piece of film. But it has the advantage of covering the corners of the tank where the pre-cut film doesn't reach, and which could still be scuffed. Pros and cons to either approach.

Good luck, whichever way you go.

http://cb1100forum.com/forum/showthread.php?tid=685

RJK: I read your post on this issue. If I planned to add a tank bag then I should also spray that part of the tank's TOP that would contact the bag, correct. I just need to be certain on that point.

[12milesout]

A ways back in this thread, Gumby asked about pads for the sides of the tank. I recently got a set from [url=http://techspec-usa.com/magento/index.php/]TechSpec, They don't list the CB on their site, but customer service confirmed they have a template. Here they are installed:

[Gumby 1100_imp]

A ways back in this thread, Gumby asked about pads for the sides of the tank. I recently got a set from [url=http://techspec-usa.com/magento/index.php/]TechSpec, They don't list the CB on their site, but customer service confirmed they have a template. Here they are installed:

Thanks for the information and source.

Was it difficult to get the pads to adhere properly at the lowest point where the tank has complex curvature?

[12milesout]

No, they have pretty strong adhesive. I set them on top of the engine for a little while after a ride to soften them up a little, and used 3m surface-prep sponges.

[736cc_imp]

Bagster tank cover on my 2013