Three Modifications to my CB - Printable Version +- The CB1100 Community Forum (https://cb1100forum.net/forum) +-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5) +--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8) +--- Thread: Three Modifications to my CB (/showthread.php?tid=9924)

Three Modifications to my CB - Bike #12_imp - 03-10-2015 Over the past week and a half I've made a few changes to my bike. First, I installed a MRA Custom Shield wind screen. It is bigger than the angular MRA screen I did have on the CB. It does a nice job of keeping the wind off my chest. The tilt is adjustable, so depending on my speed/wind conditions, I can find smooth air for my helmet. Next, T-Rex Racing Sliders. High quality, easy to install. The end section is replaceable if it becomes damaged. Finally, Yoshimura RS-3 exhaust. Also easy to install. I removed my centerstand because I like the cleaner look. Plus I have a PitBull stand to use. The CB now has a nice deep burble sound. Throttle response is snappier. My riding pleasure has gone up a couple of notches with these changes. [url=http://s225.photobucket.com/user/Rippington/media/image_zpszu8joi3p.jpg.html] [url=http://s225.photobucket.com/user/Rippington/media/image_zpsweoqzgvr.jpg.html] [url=http://s225.photobucket.com/user/Rippington/media/image_zps4u0ydngt.jpg.html] [url=http://s225.photobucket.com/user/Rippington/media/image_zps3eowsulx.jpg.html] [url=http://s225.photobucket.com/user/Rippington/media/image_zpsgvlpkact.jpg.html] [url=http://s225.photobucket.com/user/Rippington/media/image_zpsdqxoqqxu.jpg.html] [url=http://s225.photobucket.com/user/Rippington/media/image_zpsjuj4tg9o.jpg.html] Three Modifications to my CB - Cormanus - 03-10-2015 Looks good Bike#12. RE: Three Modifications to my CB - Lord Popgun - 03-10-2015 I really like those sliders. I have the Moriwaki sliders, but yours look a lot more protective, so to speak, as they stick out more. RE: Three Modifications to my CB - Rebel73_imp - 03-11-2015 Do you use the sliders as highway pegs? RE: Three Modifications to my CB - Bike #12_imp - 03-11-2015 I've never used highway pegs before. But I was able to place my heels on the sliders for a short term change in position. I have some different diameter sized titanium tubing. I bet I can make a set of extender foot pegs that could be clamped onto the slider pegs. here are a few pics of the construction of the sliders... [url=http://s225.photobucket.com/user/Rippington/media/image_zpsfye2iekw.jpg.html] [url=http://s225.photobucket.com/user/Rippington/media/image_zpsqj2degft.jpg.html]