+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: Sidestand Foot (/showthread.php?tid=9888)
Sidestand Foot - CB4ME_imp - 03-21-2015
Does anyone know where to find a kickstand foot that will fit a 2013 CB1100? Givi makes 18 different feet for various bikes but the only Honda they list is a CB500X. That foot won't work. I have that model on my NC700X and it's too big to secure the foot.
Our sidestand foot is tiny and threatens to topple the bike every time it's parked on a soft surface. I end up using the centerstand and that's a b*tch.
RE: Sidestand Foot - emptysea - 03-21-2015
I didn't even know such a thing existed. I use a plastic puck when on soft ground.
RE: Sidestand Foot - Lord Popgun - 03-21-2015
(03-21-2015, 04:29 AM)EmptySea_imp Wrote: I didn't even know such a thing existed. I use a plastic puck when on soft ground.
Me too. Got mine at Harley for about $5.
Sidestand Foot - Elipten_imp - 03-21-2015
There are plastic generic ones on Amazon, or you can go upscale for titanium from Aerostitch.
Sent from my iPad using Tapatalk
RE: Sidestand Foot - rboe - 03-21-2015
Or carry a crushed pop can.
RE: Sidestand Foot - the Ferret - 03-21-2015
Plastic disc for me too. Carry it in my tank bag.
RE: Sidestand Foot - Randy B - 03-21-2015
Why is the center stand hard to use? I find it's one of the easier one's I've had to deal with over the years. Now my old CB500T...that one SUCKED.
RE: Sidestand Foot - CB4ME_imp - 03-21-2015
Why go old school when you can spend upwards of $100?
Next trip to the dealership I may get some funny stares when I'm down on all 4's measuring sidestand feet. There are a ton of enlargers out there but nothing listed for our bike.
Thanks guys!
RE: Sidestand Foot - Cormanus - 03-21-2015
The only reason I can think of to drink beer from a can is so that, when it's finished, there's is something to stamp on to sit the bike's side stand on.
RE: Sidestand Foot - pekingduck - 03-21-2015
Why not take the stock sidestand off and have a welder add some pieces to the side to widen it, get it home and paint it. Might cost all of $20.