+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: Handlebar Risers (/showthread.php?tid=9752)
Handlebar Risers - Mick65_imp - 03-13-2014
After yesterdays ride where I did about 35mls in one go, when I got home my shoulders and wrists were quite painful, my question is what size are our handlebars because I think I'm going to try some risers.
Think I need some which face back slightly.
Sorry if this has been asked before...Regards Mick.
RE: Handlebar Risers - the Ferret - 03-13-2014
Mick they are 7/8"
RE: Handlebar Risers - Mick65_imp - 03-13-2014
(03-13-2014, 08:47 PM)The ferret_imp Wrote: Mick they are 7/8"Thanks..
RE: Handlebar Risers - rboe - 03-13-2014
I went with the Rox (off of Amazon but others carry them too) for the Griso, it was a huge help. I may go the same route with the CB. Unsure at the moment (they showed up in a catalog I recently got which is making me think). For the Griso, lowering the pegs and getting bar raisers made the bike ridable for me. Now the seat needs fixin'.
RE: Handlebar Risers - redbirds_imp - 03-13-2014
I used the 7/8" risers from SW Motech on my Triumph Tiger 1050. These raised the bars up and back about 1" and looked "stock".
RE: Handlebar Risers - Red1100_imp - 06-04-2014
I prefer to change out the handlebar instead of adding a riser. Has anyone found a handlebar with about an inch or two of rise over stock bars?
RE: Handlebar Risers - Lord Popgun - 06-04-2014
Samurider.com might have something. Or shoot Mr. T an email.
I admit I didn't look though.
RE: Handlebar Risers - Hittheroad_imp - 06-04-2014
I've thought about getting these. Samurider can give you a quote.
http://gang-store.com/23_75.html
I have these on my cb1100. they work great.
http://www.genmarmfg.com/shop/universal-risers/universal-risers,-7-8-bar-style-handlebar-risers-1-up-detail.html
Handlebar Risers - Elipten_imp - 06-04-2014
No issues with cables, line and wires with the 1" risers?
Sent from my iPad using Tapatalk
RE: Handlebar Risers - Hittheroad_imp - 06-04-2014
No issues with the cable lengths with a 1" riser. I tried a 1" up and 3/4 back riser and the cables were a little too tight for my liking. You would have to do a little rerouting of the cables. Now I just use just the 1" up. Here is a picture of the GenMar 1"up and 3/4" back.[url=http://s1235.photobucket.com/user/a320skidooboy/media/CB1100/IMG_0660.jpg.html]
![[Image: 8d3442f45e61fd296b0936e3393b92cc.jpg]](https://cb1100forum.net/forum/uploads/imp/201406/8d3442f45e61fd296b0936e3393b92cc.jpg)