+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: 19T PBI Sprocket (/showthread.php?tid=9505)
19T PBI Sprocket - redbirds_imp - 01-03-2016
After waiting months now for a response from 7th Gear Designs, I gave up that course and ordered a 19T front sprocket from PBI and it arrived Saturday. PBI does not list a steel rear sprocket for the CB as yet. Will install the front sprocket this week.
RE: 19T PBI Sprocket - the Ferret - 01-04-2016
LOL that's a shame about the poor service from 7th gear designs. I think he even joined the forum awhile back.
RE: 19T PBI Sprocket - CA200_imp - 01-04-2016
I am very happy running just the PBI 19 on my 13.
RE: 19T PBI Sprocket - redbirds_imp - 01-04-2016
(01-04-2016, 01:08 AM)CA200_imp Wrote: I am very happy running just the PBI 19 on my 13.
That's good to hear CA. I think the 19T will be all I need to get the CB in the "sweet spot" for highway cruising.
RE: 19T PBI Sprocket - 4 Paws_imp - 01-07-2016
I also had no response after several attempts to contact 7th Gear.
Any mods necessary to install the 19T from PBI?
RE: 19T PBI Sprocket - Ron in MO_imp - 01-07-2016
I too gave up on 7th gear and got my 19T sprocket elsewhere. The installation on my 2013 model was very easy and did not require any modifications to sprocket cover or drive chain guide plate, like mentioned in this "how to" forum post.
http://cb1100forum.com/forum/showthread.php?tid=3378&highlight=19T+sprocket
RE: 19T PBI Sprocket - redbirds_imp - 01-07-2016
That's good to know Ron, thanks. Supposed to rain here tomorrow so it'll be a good day to do the sprocket change.