The CB1100 Community Forum
Russell Saddle - Printable Version

+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: Russell Saddle (/showthread.php?tid=9467)

Pages: 1 2

Russell Saddle - Redbird_imp - 01-30-2016

I took a ride today (before the snow started again) to try out my new Russell Saddle. LOVE IT!! The folks at Russell got it just right for me and my butt! Some will say it does not look right on a CB, but man, it sure feels right.

[url=https://redbirdpics.smugmug.com/CB1100-Russell-Seat/n-Qv3935/i-9TtgGP9/A][Image: 398a46cf136efa6c209ca930df7f5503.jpg]

[url=https://redbirdpics.smugmug.com/CB1100-Russell-Seat/n-Qv3935/i-bNQP2QL/A][Image: a84e97962ae810bf579bb2e17fcb6082.jpg]

[url=https://redbirdpics.smugmug.com/CB1100-Russell-Seat/n-Qv3935/i-RcxpvS6/A][Image: e502b18805d8a69d8eb2890685ca79e9.jpg]

[url=https://redbirdpics.smugmug.com/CB1100-Russell-Seat/n-Qv3935/i-kvhnTHz/A][Image: cd75b6364471e702d0c719e5faff1308.jpg]

RE: Russell Saddle - Pterodactyl_imp - 01-30-2016

'Bird, looks like you're doing alright. But (bummer of a pun), what about your pillion?

Cheers

RE: Russell Saddle - emptysea - 01-30-2016

I've never ridden a bike with a seat this wide or deep. Doesn't it make it more difficult to get your butt from one side of the bike to the other when cornering?

RE: Russell Saddle - Redbird_imp - 01-30-2016

Yes, it does. I don't usually take corners that aggressively. If I'm going out for a 400 mile or more ride though it makes a big difference on my comfort level. I've had Russell seats on most all of my bikes that I would use for trips. Since I no longer have a dedicated touring motorcycle, the CB is for that as well as heading out for a short run to town.

RE: Russell Saddle - Pterodactyl_imp - 01-30-2016

With the screen it should fill that touring requirement well. What type of luggage do you use?

Cheers

RE: Russell Saddle - Redbird_imp - 01-30-2016

I have a Givi Top Case that goes on the Honda rear rack that I did not have mounted when I took the pics. Plus side cases from my 2013 CB that I will get the mounts set up for after I relocate the rear blinkers. I've been procrastinating on that, but I do need to just get to work on it. Also a dry bag to strap on the pillion section of the seat.

RE: Russell Saddle - noroomtomove - 01-30-2016

A seat that puts a smile on the dial, enjoy.

Regards

RE: Russell Saddle - jrns_imp - 01-30-2016

very unique, looks like great quality. I was on their site and I see another design for the CB11 as well (half moon shape). did you design your saddle yourself or was it from a design they had already?

RE: Russell Saddle - Gumby 1100_imp - 01-30-2016



Russell makes a line called Sport Seats which have somewhat less pronounced "wings" than their standard seats. I had this done to my CBF1000 as shown in the photo.

It was absolutely the most comfortable seat, while riding. However, even with the smaller wings, they initially seemed to dig into my legs when I came to a stop with one or both legs on the ground. This became a little less noticeable as time when on, but it helped to slide forward a bit on the seat before a stop.

The best application for the Russells are cruisers with very low seat heights. Then the wings are almost no hindrance at stops.

RE: Russell Saddle - Redbird_imp - 01-31-2016

jrns, the design is what I got when I specified "rectangles" as the seat stiching pattern. I did pick their graphite color, got the seating surface in leather, the sides in vinyl.

Gumby, that's what I do when I come to a stop. Since I've had these seats on other bikes, sliding forward a bit as I'm stopping is something I do without even thinking about it. I really though about getting a Sport Seat this time around, almost ordered it that way.

Ken