The CB1100 Community Forum
Triumph fork gaiters are great! - Printable Version

+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: Triumph fork gaiters are great! (/showthread.php?tid=9407)

Pages: 1 2


Triumph fork gaiters are great! - Olyrider - 03-14-2016

Just installed the Triumph gaiters and clamps on my "13. Someone else here made the recommendation.

I bet they last as long as the bike. Very well made. And i like the black clamps. Much better than stainless steel.

Fork gaiters: Triumph part #T2040349 (edited to correct part number. This one is right!)
Clamps: Triumph part #T2045157

You'll also need two screws( one per) for the clamps. The clamps aren't sold with them. I bought them from Triumph, but I can't find the package with the part #.

I think they cost me about $75

A picture would just show some black rubber thingies on my forks. I'm sure you know what they look like!Beer


RE: Triumph fork gaiters are great! - Randy B - 03-14-2016

(03-14-2016, 07:51 AM)Olyrider_imp Wrote: Just installed the Triumph gaiters and clamps on my "13. Someone else here made the recommendation.

I bet they last as long as the bike. Very well made. And i like the black clamps. Much better than stainless steel.

Fork gaiters: Triumph part #T2040349 (edited to correct part number. This one is right!)
Clamps: Triumph part #T2045157

You'll also need two screws( one per) for the clamps. The clamps aren't sold with them. I bought them from Triumph, but I can't find the package with the part #.

I think they cost me about $75

A picture would just show some black rubber thingies on my forks. I'm sure you know what they look like!Beer

Are you sure about that part number? It comes up as a switch assembly.

[url=https://www.google.com/search?q=T2040309&oq=T2040309&aqs=chrome..69i57&sourceid=chrome&ie=UTF-8]https://www.google.com/search?q=T2040309...e&ie=UTF-8


RE: Triumph fork gaiters are great! - Lord Popgun - 03-14-2016

I think he means T2040349


RE: Triumph fork gaiters are great! - Olyrider - 03-14-2016

(03-14-2016, 08:31 AM)Lord Popgun_imp Wrote: I think he means T2040349


I do, Popgun. Thanks And thanks, Randy B.! And to think I stared at that number for five minutes before hitting send. Worship

[Image: e6fa0335245e18db8522fd2a9d0b2a81.jpg]
I'm going to edit my first post to show the correct number.

Sorry, guys!!


RE: Triumph fork gaiters are great! - ryanschillinger_imp - 03-16-2016

But installation requires fork removal, right?


RE: Triumph fork gaiters are great! - kmoney_imp - 03-16-2016

(03-16-2016, 11:38 AM)ryanschillinger_imp Wrote: But installation requires fork removal, right?
Yes it does. If you want gaiters, it's probably worth it though -- they tend to look much better than most of the "splitable" style one you can buy.


Triumph fork gaiters are great! - gbpack89_imp - 03-24-2016

Word to the wise, spend the money on a good set of Triumph or kawasaki gaitors. I bought these, and although they work after notching out the lower bell on the backside, it was a pain to get them tight. Harleys must have a much larger lower fork. [Image: 7e91c7ef8f5a6e023f10f1e36db468b4.jpg]

Sent from my VS985 4G using Tapatalk


RE: Triumph fork gaiters are great! - mattmcuomo@yahoo.com - 03-24-2016

(03-24-2016, 01:29 AM)gbpack89_imp Wrote: Word to the wise, spend the money on a good set of Triumph or kawasaki gaitors. I bought these, and although they work after notching out the lower bell on the backside, it was a pain to get them tight. Harleys must have a much larger lower fork. [Image: 7e91c7ef8f5a6e023f10f1e36db468b4.jpg]

Sent from my VS985 4G using Tapatalk
I got the same ones, bottoms too big. I was going to return them but haven't yet. Did you notch them and make them fit good on the bottom? I had considered doing that....

Sent from me......


Triumph fork gaiters are great! - gbpack89_imp - 03-24-2016

Yep, just cut a /\ out of the bottom with the point touching the lover bellows. It takes some time but it looks good once it's tight
[Image: 61378784592c3d640a3d8cd04172aaa7.jpg]

Sent from my VS985 4G using Tapatalk


RE: Triumph fork gaiters are great! - mattmcuomo@yahoo.com - 03-24-2016

Good deal, thanks.

Sent from me......