![]() |
|
Header Wrap - Printable Version +- The CB1100 Community Forum (https://cb1100forum.net/forum) +-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5) +--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8) +--- Thread: Header Wrap (/showthread.php?tid=9396) |
Header Wrap - gbpack89_imp - 03-13-2016 Has anyone wrapped the pipes on a standard? ![]() Sent from my VS985 4G using Tapatalk RE: Header Wrap - immgunn_imp - 03-13-2016 No, but I'm gonna' (as soon as I get around to it). Header Wrap - gbpack89_imp - 03-13-2016 Just ordered it. I'll let you know how it goes ![]() Sent from my VS985 4G using Tapatalk RE: Header Wrap - Carguy1959_imp - 03-13-2016 That's funny, I ordered 2in X 50ft roll in black off eBay. Should be here Friday RE: Header Wrap - gbpack89_imp - 03-13-2016 I ordered two of the 50ft. Didn't want to run out Sent from my VS985 4G using Tapatalk RE: Header Wrap - capttwb136_imp - 03-13-2016 http://www.centuryperformance.com/exhaust-header-heat-wraps-do-not-use.html I thought this information might be useful to some. Header wrap appears to be controversial. RE: Header Wrap - gbpack89_imp - 03-13-2016 I'm thinking that's more of an issue with high performance car engines. Not bikes with constant air flow. Although I have seen mufflers discolor from the extra heat that would have normally dissipated from the pipes farther upstream. But since I'm run a short side pipe after the cat that will be ceramic coated, no worries here! Sent from my VS985 4G using Tapatalk RE: Header Wrap - EarsOnWheels_imp - 03-13-2016 Looking forward to seeing results. RE: Header Wrap - gbpack89_imp - 03-21-2016 Fyi, it takes 50ft to do the four header pipes. If you want to do the collector/cat you will need a second roll. Also prepare to be itchy haha Sent from my VS985 4G using Tapatalk Header Wrap - gbpack89_imp - 03-22-2016 ![]() ![]() Sent from my VS985 4G using Tapatalk |