+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: Factory muffler with a baffle cut out (/showthread.php?tid=9381)
Factory muffler with a baffle cut out - WayFast86_imp - 04-11-2016
Well guys I've only had the bike for a week and already have a couple of mods (hehehe I can't leave stuff alone). Just finished up a homemade fender eliminater this weekend so I decided after a good scrubbing it was looking good enough for a video. This muffler was so quite factory and something had to be done. I looked up slip ons and other more expensive options so I realized I would be stuck with it for a while. After more observation of the muffler I noticed there are 3 Allen screws that hold the cap at the end of it. I took the cap off and started brainstorming... Which led the hacking away the inside of the baffles! So the small pipe that goes through the end cap is attached to a wall. There are several of these inside the muffler and all I did was cut and drill the last one out. Now I (and people around me) can hear the some of the awesomeness coming from the CB1100's engine. Now I know this isn't as deep or throaty as some slip ons but for the price, I'm happy!
http://youtu.be/6Aa5T3HdDGo
Another pic with more light
RE: Factory muffler with a baffle cut out - Lord Popgun - 04-11-2016
http://cb1100forum.com/forum/showthread.php?tid=2829
A whole thread on gutting a factory muffler. Lots of pics if you page through. Post 18 has a diagram of the internals of our muffler.