![]() |
|
Japanese Seat - Printable Version +- The CB1100 Community Forum (https://cb1100forum.net/forum) +-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5) +--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8) +--- Thread: Japanese Seat (/showthread.php?tid=9323) |
Japanese Seat - Alwin_imp - 04-19-2016 i need a lower seat, so i went to a upholsterer and asked him to lower my seat. I have a 2015 CB1100 EX or DLX, and the upholsterer says he can only get 1cm or 0,4 inches because of the ground plate. Samurider has the japanese Seat http://www.samurider.com/?p=14350 witch is about 3cm or 1,2 Inches lower than mine. Is there a different ground plate or just a different foam? With the same plate, the foam must be very thin. RE: Japanese Seat - curlyjoe - 04-19-2016 I'm fairly certain the CB1100 EX and CB1100 standard seats are not interchangable so that one from samurider will probably not fit your EX. You could send them an email to confirm on way or the other. Samurider also sells [url=http://www.samurider.com/?p=22520] K&H low seats for the EX/DLX. They are 30 inch / 765 mm seat height. I suspect the padding on the low seats would be quite thin though. Japanese Seat - Verdecken_imp - 04-19-2016 I have a K&H low seat and I like it a lot. Doesn't seem too low on padding or anything to me Sent from my iPhone using Tapatalk RE: Japanese Seat - Alwin_imp - 04-20-2016 Got a reply from samurider, "Regards to the "Honda: CB1100 Factory Seat Japan model (honda0009)", it fits the CB1100EX. But, it touches the fuel tank." Whatever " touches" means for them. RE: Japanese Seat - curlyjoe - 04-20-2016 "touches" doesn't sound good to me. I have the K&H seat and I like it a lot. High quality construction too IMHO. RE: Japanese Seat - Macross_imp - 06-05-2016 Hello, i am interested in getting a lower seat. So if i have the standard version that seat should work fine for me? Thank you. RE: Japanese Seat - flynrider - 06-06-2016 Yes, the factory low seat will fit any of the standard models. RE: Japanese Seat - Macross_imp - 06-06-2016 Thank you. |