+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: Puig Windscreen (/showthread.php?tid=9128)
Puig Windscreen - Hondadawg1_imp - 01-20-2017
Just got the Puig Thunder windscreen. I haven't installed it yet. Anybody else have one and any installation pointers ? The instructions are in a couple diffrent language's an leave a bit to be desired.[attachment=5888]
RE: Puig Windscreen - CB4ME_imp - 01-20-2017
Two fixation points but what else? Hope you don't have to fool with the turn signals. Major pain.
RE: Puig Windscreen - harishsknair_imp - 01-20-2017
Pulling the indicators are a PIA yea... I found it really helps if you have one of those allen wrenches that you click into your regular 1/4 socket wrench as opposed to the regular L shapped allen wrenches. They are usually 4-6 inches long and magnetized, at least the ones I have from HF are. They really help
RE: Puig Windscreen - Lord Popgun - 01-20-2017
It looks like you do have to remove the signals to put it on. It says it comes with new signals to replace the old ones too. http://www.monsterparts.com/pc/0121/Windscreens/0121.html
I changed my 2013 signals to 2014 signals and I could not get them off/on without removing (or just moving i) the headlight shell. Not that it was hard though. Just remember to note/mark the position for headlight adjustment.
RE: Puig Windscreen - Hondadawg1_imp - 01-20-2017
Your absolutely correct, the windscreen comes with new, slimmer turn signals with a carbon fiber look. As I said the instructions are poor and it looks as if I am to change the allen head bolts with two hex head bolts but with the confined area I'm not sure how I'm supposed to get a wrench in there.
RE: Puig Windscreen - uscgmac_imp - 01-20-2017
Hummm, I wonder how it's going to look in real life on the bike, please post some pics when done. I have the older style that just connects to the head light bolts. Doesn't interfere with the turn signals. This one looks pretty cool.
Sent from my SM-J700T using Tapatalk
RE: Puig Windscreen - Hondadawg1_imp - 01-21-2017
I will post a few pics when I put everything on. I am waiting on my adjustable footpegs to arrive and plan to spend a day tinkering. I want another set of bars with a little more pull back but I want to get the windscreen, seat and footpegs on first to see how it sits and where I want them to be.
RE: Puig Windscreen - Mikestib1_imp - 01-27-2017
Puig offers many windscreens for naked bikes. I ordered a 0869F which is dark smoke and 340 mm high and 320 wide, no need to fool with the blinkers. I should have it next week and willi let everyone know how it works. Wanted more than a flyscreen as in my experience they are stylish but not functional, unless you want to keep insects off the clocks.
RE: Puig Windscreen - Hondadawg1_imp - 02-05-2017
(01-21-2017, 07:49 AM)Hondadawg1_imp Wrote: I will post a few pics when I put everything on. I am waiting on my adjustable footpegs to arrive and plan to spend a day tinkering. I want another set of bars with a little more pull back but I want to get the windscreen, seat and footpegs on first to see how it sits and where I want them to be.
Ya'll were right, messing with the turn signals was a pain. Not that difficult, just aggravating as heck. I like we the way it come out though. Not the best pics but here you go.