The CB1100 Community Forum
Road comet fairing 2017- installation question - Printable Version

+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: Road comet fairing 2017- installation question (/showthread.php?tid=8977)

Pages: 1 2

Road comet fairing 2017- installation question - pittycheria_imp - 07-21-2017

Installing the comet on my 2017- the bottom nut to connect to the horn bracket / it is not a fit. Has anyone done this? If so did you remove the horn bracket ? Any suggestions .. thank you


Sent from my iPhone using Tapatalk

RE: Road comet fairing 2017- installation question - Motogeezer1949_imp - 07-21-2017

If I recall, I readjusted the angles of the horn brackets ('14 DLX) and reshaped the bracket a little. Plus, I put a little pressure on the bottom of the fairing to make it align. Hope this helps.



(07-21-2017, 01:30 PM)pittycheria_imp Wrote: Installing the comet on my 2017- the bottom nut to connect to the horn bracket / it is not a fit. Has anyone done this? If so did you remove the horn bracket ? Any suggestions .. thank you


Sent from my iPhone using Tapatalk


RE: Road comet fairing 2017- installation question - Lord Popgun - 07-21-2017

Pitty, any chance you could post a pic of the problem?

Road comet fairing 2017- installation question - pittycheria_imp - 07-22-2017

I am all set , as Moto suggested had to put some pressure to put it in place - thanks [Image: 5aa681a14e42c7516879627867e6fc50.jpg]


Sent from my iPhone using Tapatalk

RE: Road comet fairing 2017- installation question - Lord Popgun - 07-22-2017

I'm not sure what your problem was but I had to open the hole in the fairing some. It's always something ya know Smile

RE: Road comet fairing 2017- installation question - jedd_imp - 07-22-2017

!!!!!Freakin' Gorgeous-ness!!!!

(07-22-2017, 04:07 AM)pittycheria_imp Wrote: I am all set , as Moto suggested had to put some pressure to put it in place - thanks [Image: 5aa681a14e42c7516879627867e6fc50.jpg]


Sent from my iPhone using Tapatalk


Road comet fairing 2017- installation question - pittycheria_imp - 07-22-2017

(07-22-2017, 04:12 AM)Lord Popgun_imp Wrote: I'm not sure what your problem was but I had to open the hole in the fairing some. It's always something ya know Smile


The hole was the right size for me - it was just that the hole did not align with the horn bracket so had to push the fairing in (keep it pushed) while I pit the nut in and tightened it . All good now [Image: d30063788d645366413a32c1f7acce09.png]


Sent from my iPhone using Tapatalk

RE: Road comet fairing 2017- installation question - Lord Popgun - 07-23-2017

Yeah, me too. What I meant by opening the hole is I elongated it slightly. Glad you got it worked out. Its easy off and easy on now! I just leave the mounts on when removed.

RE: Road comet fairing 2017- installation question - Deketh_imp - 07-26-2017

Dang that looks good. Could I bother you for a few more pics?

Road comet fairing 2017- installation question - pittycheria_imp - 07-27-2017

(07-26-2017, 09:16 PM)Deketh_imp Wrote: Dang that looks good. Could I bother you for a few more pics?

Here you go

[Image: 6da874463a1a132abb8c64d3b920dcf8.jpg]

[Image: 96d5fa1d90c45d32c2f84c4e11504072.jpg]

[Image: 8a9bb79fbb1100f6b9a9c8713ac21296.jpg][Image: df1d49818534ab6553d057e1df007c51.jpg]


Sent from my iPhone using Tapatalk