+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: CB1100 Rack (/showthread.php?tid=8958)
Pages:
1
2
CB1100 Rack - Chris Goldson_imp - 10-05-2017
Good morning
Has anyone fitted a rack to a 2015 SA-E model.
I have tried one rack but that did not fit and have been advised that I may need to modify the bike to get any to fit this model which I am reluctant to do.
Any advice please?
Best Wishes
Chris
RE: CB1100 Rack - the Ferret - 10-05-2017
Just out of curiosity Chris, your bio says you are in Lincoln (Nebraska?). There were no 2015's imported to the United States and to the best of my knowledge the only 2015s were special editions for Japan. So I assume you are talking a 2014 std? or 2016 std? There are certainly racks made to fit those from Honda and others and many members have installed them. There are differences between the stds and the deluxes (2014 only) that require different racks.
RE: CB1100 Rack - Chris Goldson_imp - 10-05-2017
(10-05-2017, 11:04 PM)The ferret_imp Wrote: Just out of curiosity Chris, your bio says you are in Lincoln (Nebraska?). There were no 2015's imported to the United States and to the best of my knowledge the only 2015s were special editions for Japan. So I assume you are talking a 2014 std? or 2016 std? There are certainly racks made to fit those from Honda and others and many members have installed them. There are differences between the stds and the deluxes (2014 only) that require different racks.
Hi
No sorry it is Lincoln UK.
I think I must have got a standard rack as it would not fit. I have not seen one over here that is described to fit the deluxe version.
Thanks.
Best Wishes
Chris
RE: CB1100 Rack - kennyw - 10-05-2017
If you bought the Honda rack, it should come with brackets that make it fit the EX/DLX. Other brands I'm not sure about.
Sent from my SM-N950U using Tapatalk
This is the one you want.
https://www.samurider.com/?p=18457/#itemImage
RE: CB1100 Rack - suhawk305 - 10-06-2017
Chris,
Kenny is right.
In my experience, I purchased an OEM rack for my first 2014 CB1100 Standard a year ago. Part number 08L70 MGC A20 for Standards only.
After my accident, I replaced my CB1100 Standard with another one. American Honda no longer listed the rack P/N ......A20 as available. Instead, I had to order the rack P/N 08L70 MGC A40 Which will fit both 2014 Deluxe and Standard.
As far as I can tell, both racks are identical. As Kenny said, you need to use the garnish stays (brackets), 8mm socket bolts and nuts needed to adapt the rack to the Deluxe (CB1100SA). These parts came with the P/N.....A40 kit.
I believe I still have the brackets and screws on my messy work bench at home. If you want these parts, contact me and we can figure the best way I can ship them to you. I will be home on Monday and will look to see if I still have these parts.
Here are the instructions that I used to install the rack: http://powersports.honda.com/documentum/MW01/08L70-MGC-A40.pdf
Maybe it [/align]could save you from buying another rack.
RE: CB1100 Rack - Chris Goldson_imp - 10-07-2017
(10-06-2017, 08:15 AM)suhawk305_imp Wrote: Chris,
Kenny is right.
In my experience, I purchased an OEM rack for my first 2014 CB1100 Standard a year ago. Part number 08L70 MGC A20 for Standards only.
After my accident, I replaced my CB1100 Standard with another one. American Honda no longer listed the rack P/N ......A20 as available. Instead, I had to order the rack P/N 08L70 MGC A40 Which will fit both 2014 Deluxe and Standard.
As far as I can tell, both racks are identical. As Kenny said, you need to use the garnish stays (brackets), 8mm socket bolts and nuts needed to adapt the rack to the Deluxe (CB1100SA). These parts came with the P/N.....A40 kit.
I believe I still have the brackets and screws on my messy work bench at home. If you want these parts, contact me and we can figure the best way I can ship them to you. I will be home on Monday and will look to see if I still have these parts.
Here are the instructions that I used to install the rack: http://powersports.honda.com/documentum/MW01/08L70-MGC-A40.pdf
Maybe it [/align]could save you from buying another rack.
Many thanks for this which is most useful. Looking at the diagrams I think it is the flange collars that are missing and the extra long bolts.
Best Wishes
Chris
RE: CB1100 Rack - Chris Goldson_imp - 10-07-2017
(10-07-2017, 05:14 AM)Chris Goldson_imp Wrote:(10-06-2017, 08:15 AM)suhawk305_imp Wrote: Chris,
Kenny is right.
In my experience, I purchased an OEM rack for my first 2014 CB1100 Standard a year ago. Part number 08L70 MGC A20 for Standards only.
After my accident, I replaced my CB1100 Standard with another one. American Honda no longer listed the rack P/N ......A20 as available. Instead, I had to order the rack P/N 08L70 MGC A40 Which will fit both 2014 Deluxe and Standard.
As far as I can tell, both racks are identical. As Kenny said, you need to use the garnish stays (brackets), 8mm socket bolts and nuts needed to adapt the rack to the Deluxe (CB1100SA). These parts came with the P/N.....A40 kit.
I believe I still have the brackets and screws on my messy work bench at home. If you want these parts, contact me and we can figure the best way I can ship them to you. I will be home on Monday and will look to see if I still have these parts.
Here are the instructions that I used to install the rack: http://powersports.honda.com/documentum/MW01/08L70-MGC-A40.pdf
Maybe it [/align]could save you from buying another rack.
Many thanks for this which is most useful. Looking at the diagrams I think it is the flange collars that are missing and the extra long bolts.
Best Wishes
Chris
Many thanks for this which is most useful. Looking at the diagrams I think it is the flange collars that are missing and the extra long bolts.
Best Wishes
Chris
I meant to say plus the garnish brackets of course
RE: CB1100 Rack - kennyw - 10-08-2017
I also have a set of brackets and hardware left over from installing the rack on my 2013. However, I want to do some test fitting see if they work to install the hard panniers on a 2014 DLX or 2017 EX before I consider getting rid of them.
I did post a thread back when I received my rack detailing what hardware and spacers you needed to buy from a hardware store to mount it on a 2013. It originally arrived in the mail missing all hardware. You may be able to use some info from that to get started.
RE: CB1100 Rack - marvincon_imp - 10-08-2017
I fitted a Givi chrome rack to my 2014 EX with no problems, no mods required.
RE: CB1100 Rack - Chris Goldson_imp - 10-09-2017
(10-08-2017, 06:23 AM)marvincon_imp Wrote: I fitted a Givi chrome rack to my 2014 EX with no problems, no mods required.
That's interesting, did you have to change any brackets or use additional spacers?
Best Wishes
Chris