+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: back pegs (/showthread.php?tid=8857)
back pegs - mdharne_imp - 04-06-2018
Any one know of any wider back pegs that will work on 2014 cb1100?
RE: back pegs - Lord Popgun - 04-06-2018
I seem to recall someone put Harley pegs on. Something wider anyway. I’ll have to do some searching and see if I can find the thread.
Ok, it wasn’t Harley pegs, it was ST pegs: http://cb1100forum.com/forum/showthread.php?tid=3268&pid=169626#pid169626
He said he used a 2002 ST1100, but the part number is the same for the 2012 ST1300. I have one and can send you a pic if you want. Notice that you cannot buy a peg. You have to buy all the parts and put it together if you buy Honda OEM parts. Here a a fiche: https://www.partzilla.com/catalog/honda/motorcycle/2012/st1300a-ac/step
RE: back pegs - Banned_imp - 04-06-2018
Or was it Buell pegs? I remember reading about that although I can't remember if they were front or rear.
RE: back pegs - Lord Popgun - 04-06-2018
W/R, I could only find ST1100, but I didn’t read EVERY post that came up in the search.
A search on Buell pegs brings up a number of posts with them for rider pegs.
RE: back pegs - Banned_imp - 04-06-2018
I went and looked at my Buell, it's kind of hard to get to and I can't bend over and measure but I don't think Buell pegs would work for the back. If they did fit I don't think they could be folded. Too bad as they are quite roomy, comparatively speaking.
Good thing the ST pegs fit.
RE: back pegs - mdharne_imp - 04-13-2018
Thanks for checking, Sorry I havent been online in a while had a cold and been laid up.
back pegs - PowerDubs_imp - 04-15-2018
Anyone have a picture of these st pegs mounted?
Sent from my iPhone using Tapatalk