+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: Vario Footpeg replacement mounting bolts (/showthread.php?tid=8852)
Vario Footpeg replacement mounting bolts - Ojiisan_imp - 04-17-2018
Hey everyone. Would anybody here know where I can get STEEL replacement bolts for the Vario footpegs, or at least what size, pitch, etc. they are? Both of mine have stripped out the Hex hole, and I will need to drill them out and replace, but I would like to purchase the new ones before hand.
Thanks in advance : )
RE: Vario Footpeg replacement mounting bolts - Houtman_imp - 04-18-2018
The bolt inside the peg is a m 6/ 1.00 and one inch long.
The bolt on the extender is a m 8/ 1.25 and is just over half an inch
Both use a 5 mm hex driver.
I hope this will help you !
RE: Vario Footpeg replacement mounting bolts - Ojiisan_imp - 04-19-2018
(04-18-2018, 11:01 PM)Houtman_imp Wrote: The bolt inside the peg is a m 6/ 1.00 and one inch long.
The bolt on the extender is a m 8/ 1.25 and is just over half an inch
Both use a 5 mm hex driver.
I hope this will help you !
Hey thanks for taking the time to answer my post! I luckily found an industrial fastener supply 10 minutes away from me tucked away in a warehouse, and they matched me right up! Stainless is the way to go.