The CB1100 Community Forum
CRG mirrors on machined end weights - Printable Version

+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: CRG mirrors on machined end weights (/showthread.php?tid=8734)

Pages: 1 2

CRG mirrors on machined end weights - greekcb_imp - 11-15-2017

[Image: 2a95c5a0c002d4844710095d6c533eb0.jpg]

[Image: b505d5326df5b545177892897acfd616.jpg]

[Image: 20fa5743449e842dafdb20caa407280a.jpg]

[Image: 7d02cb4640184a6f02cedb788b623732.jpg]

Hey guys , I wanted bar end mirrors but didn’t wanna lose the weights so per some info I searched on here I had a machine shop turn the weights to accommodate mirror clamps . Came out great and all stock weights left in place . All I had to do was paint the inside of weights due to them being bare metal after the work




Sent from my iPhone using Tapatalk

RE: CRG mirrors on machined end weights - the Ferret - 11-15-2017

Now that's doing it right!

RE: CRG mirrors on machined end weights - greekcb_imp - 11-15-2017

(11-15-2017, 09:24 AM)The ferret_imp Wrote: Now that's doing it right!

Thanks Ferret! It was worth the running around to get it all figured out

RE: CRG mirrors on machined end weights - Lord Popgun - 11-15-2017

That came out awesome!!

RE: CRG mirrors on machined end weights - SportsterDoc - 11-15-2017

Nicely done!

RE: CRG mirrors on machined end weights - Cormanus - 11-15-2017

Nicely done greekcb.

RE: CRG mirrors on machined end weights - Banned_imp - 11-15-2017

That is an awesome idea, I think i will do this one once healed up.

Where did the mirrors come from?

CRG mirrors on machined end weights - greekcb_imp - 11-16-2017

Thanks everyone ! I’m pretty happy with it, still wanna do a test run but with the weather by me changing I haven’t had a chance , hoping I can squeak in one more ride

W/R , I got the mirrors from Revzilla . Didn’t wanna screw around with cheapie mirrors so I went with the CRG lanesplitter mirrors. I have them on my Enfield as well and if they hold up to that paint shaker the CB is a piece of cake lol


Sent from my iPhone using Tapatalk

RE: CRG mirrors on machined end weights - Banned_imp - 11-16-2017

Thanks for the info greekcb!!

RE: CRG mirrors on machined end weights - ACI4_imp - 05-09-2018

I picked up a couple CRG arrow mirrors to mount on my bar end weights, I love how they look. Only problem I have is the weights spin in place even with that long bolt tightened down all the way. I haven't seen any body else who has had the weights machined to accept the clamp mention this issue. So at this point I feel like i'm doing something wrong.