+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: MFW Highway Pegs Installed (/showthread.php?tid=8702)
MFW Highway Pegs Installed - redbirds_imp - 09-13-2018
Installed these on Sparky's bike today. Well finished high quality items from Revzilla.
![[Image: 4e434fc84d104589537fb1c9689513d7.jpg]](https://cb1100forum.net/forum/uploads/imp/201809/4e434fc84d104589537fb1c9689513d7.jpg)
![[Image: d02176f732e3a4a00ccdec1237afd509.jpg]](https://cb1100forum.net/forum/uploads/imp/201809/d02176f732e3a4a00ccdec1237afd509.jpg)
![[Image: 8f002cdf75e199cd3b69c1c71ea64d15.jpg]](https://cb1100forum.net/forum/uploads/imp/201809/8f002cdf75e199cd3b69c1c71ea64d15.jpg)
![[Image: 5426a5b730dfafbd4fa3a8a0bbde76d9.jpg]](https://cb1100forum.net/forum/uploads/imp/201809/5426a5b730dfafbd4fa3a8a0bbde76d9.jpg)
![[Image: 9b620da4c522ea732dd77225969e61a9.jpg]](https://cb1100forum.net/forum/uploads/imp/201809/9b620da4c522ea732dd77225969e61a9.jpg)
![[Image: e17b823e2413915ed3316e274b4fdf96.jpg]](https://cb1100forum.net/forum/uploads/imp/201809/e17b823e2413915ed3316e274b4fdf96.jpg)
RE: MFW Highway Pegs Installed - pdedse - 09-13-2018
Nice! Just installed swmotech engine guards and pegs are next so that gives me some ideas.
RE: MFW Highway Pegs Installed - Cormanus - 09-13-2018
Looking good, redbirds. That’s a mighty screen.
RE: MFW Highway Pegs Installed - the Ferret - 09-13-2018
what is the big bite out of them looking thing about?
RE: MFW Highway Pegs Installed - redbirds_imp - 09-13-2018
(09-13-2018, 07:08 AM)The ferret_imp Wrote: what is the big bite out of them looking thing about?
Two reasons I think. to allow easier access to the mounting bolt that connects the peg to it's base and to keep road debris out of the peg.
RE: MFW Highway Pegs Installed - jedd_imp - 09-18-2018
Redbirds, will that MFW allow the swingout orientation to be set @ 45 deg, vs. vertical as shown?
RE: MFW Highway Pegs Installed - redbirds_imp - 09-18-2018
(09-18-2018, 03:31 AM)jedd_imp Wrote: Redbirds, will that MFW allow the swingout orientation to be set @ 45 deg, vs. vertical as shown?
The peg base has a single detent to hold it vertical when not in use. It's either fully up or fully down as shown in the photos. There is a bolt, not easily seen in the pics that allows rotation of the base. That would allow the peg to be oriented most any way desired by the user. I have it positioned so the pegs are vertical when up even though the bar actually is not vertical. In short, I think the pegs can be positioned as you want.