+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: handlebar risers (/showthread.php?tid=8612)
handlebar risers - terrydlargo_imp - 05-17-2013
Has anybody installed a set of risers on their cb1100 yet? I was thinking about getting the GenMar risers, and would be interested to get an evaluation from an informed source.
RE: handlebar risers - jamboa_imp - 05-17-2013
(05-17-2013, 02:54 AM)terrydlargo_imp Wrote: Has anybody installed a set of risers on their cb1100 yet? I was thinking about getting the GenMar risers, and would be interested to get an evaluation from an informed source.I installed the Genmar risers andvI findvthem more comfortable. No problem with anything.
RE: handlebar risers - terrydlargo_imp - 05-17-2013
(05-17-2013, 03:05 AM)jamboa_imp Wrote:I installed the Genmar risers andvI findvthem more comfortable. No problem with anything.(05-17-2013, 02:54 AM)terrydlargo_imp Wrote: Has anybody installed a set of risers on their cb1100 yet? I was thinking about getting the GenMar risers, and would be interested to get an evaluation from an informed source.I installed the Genmar risers andvI findvthem more comfortable. No problem with anything.
Did you get the 1 inch up, or the 1 inch up and 1.5 inch back? Also did you move or do anything with the wiring?
RE: handlebar risers - oldyaler_imp - 05-17-2013
(05-17-2013, 03:14 AM)terrydlargo_imp Wrote:I installed the Genmar risers andvI findvthem more comfortable. No problem with anything.(05-17-2013, 03:05 AM)jamboa_imp Wrote:I installed the Genmar risers andvI findvthem more comfortable. No problem with anything.(05-17-2013, 02:54 AM)terrydlargo_imp Wrote: Has anybody installed a set of risers on their cb1100 yet? I was thinking about getting the GenMar risers, and would be interested to get an evaluation from an informed source.I installed the Genmar risers andvI findvthem more comfortable. No problem with anything.
Did you get the 1 inch up, or the 1 inch up and 1.5 inch back? Also did you move or do anything with the wiring?
Did you get the 1 inch up, or the 1 inch up and 1.5 inch back? Also did you move or do anything with the wiring? No extra work needed for the 1" risers. The up and back risers require you to disconnect the upper brake line bracket and possible re-routing of some wiring. I've installed them on other bikes and installation is pretty much the same.
RE: handlebar risers - jamboa_imp - 05-17-2013
(05-17-2013, 03:14 AM)terrydlargo_imp Wrote:I installed the Genmar risers andvI findvthem more comfortable. No problem with anything.(05-17-2013, 03:05 AM)jamboa_imp Wrote:I installed the Genmar risers andvI findvthem more comfortable. No problem with anything.(05-17-2013, 02:54 AM)terrydlargo_imp Wrote: Has anybody installed a set of risers on their cb1100 yet? I was thinking about getting the GenMar risers, and would be interested to get an evaluation from an informed source.I installed the Genmar risers andvI findvthem more comfortable. No problem with anything.
Did you get the 1 inch up, or the 1 inch up and 1.5 inch back? Also did you move or do anything with the wiring?
Did you get the 1 inch up, or the 1 inch up and 1.5 inch back? Also did you move or do anything with the wiring? I ordered the universal but it also brings it back some. Therebis plenty of wire and cable room. I have a setbof slightly taller but more bend in and down bars I hope to install with the gen mar risers as well.
RE: handlebar risers - CA200_imp - 05-17-2013
If anyone can post a picture it would be nice
RE: handlebar risers - johnnymac_imp - 05-18-2013
Can anybody tell me where you ordered your risers? The universal risers jamboa got sound good.
I am glad you are all doing this, I have been thinking about risers since I test rode the bike.
RE: handlebar risers - oldyaler_imp - 05-18-2013
(05-18-2013, 08:43 AM)johnnymac_imp Wrote: Can anybody tell me where you ordered your risers? The universal risers jamboa got sound good.http://www.genmarmfg.com is one. You could check out Rox risers at http://www.roxspeedfx.com
I am glad you are all doing this, I have been thinking about risers since I test rode the bike.
RE: handlebar risers - bird_imp - 06-08-2013
What is the diameter of our handlebars 7/8 or1 inch I am going to get some risers
RE: handlebar risers - Lord Popgun - 06-08-2013
7/8 inch