![]() |
|
Advice on aux Brake lights. - Printable Version +- The CB1100 Community Forum (https://cb1100forum.net/forum) +-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5) +--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8) +--- Thread: Advice on aux Brake lights. (/showthread.php?tid=8521) |
Advice on aux Brake lights. - hawk123_imp - 08-12-2019 I installed aux LED lights on my bike for night riding. I have a Denali B6 aux brake light which I want to install but it is proving to be a challenge. If anyone has either successfully done it or have some expert advice, I would welcome it. https://denalielectronics.com/collections/led-brake-lights/products/dnl-b6-10000 RE: Advice on aux Brake lights. - Cormanus - 08-12-2019 Looks good, hawk. And, because I've nothing better to do: ![]()
Advice on aux Brake lights. - hawk123_imp - 08-12-2019 Thanks Cormanus. Did not know how to include an image. Sent from my iPhone using Tapatalk RE: Advice on aux Brake lights. - peterbaron - 08-13-2019 Looks very good and bright = RE: Advice on aux Brake lights. - GoldOxide_imp - 08-13-2019 (08-12-2019, 02:49 AM)hawk123_imp Wrote: I installed aux LED lights on my bike for night riding. I have a Denali B6 aux brake light which I want to install but it is proving to be a challenge. If anyone has either successfully done it or have some expert advice, I would welcome it. https://denalielectronics.com/collections/led-brake-lights/products/dnl-b6-10000 Sharp and crisp clarity. RE: Advice on aux Brake lights. - Gone in 60 - 08-16-2019 Did you get your auxiliary brake light mounted and hooked up? The mount looked easy from the pics. I wired an auxiliary LED brake light on my bike, just used Posi-Taps into the brake light wires, ran the wires through some heat shrink tube to where the light is mounted. Advice on aux Brake lights. - hawk123_imp - 08-18-2019 My challenge is to access the breaklight wires cleanly. The first exposed breaklight wire is under the seat. Looks like to do a clean job, I have to disassemble the fender, brake assly to run a wire cleanly. Sent from my iPhone using Tapatalk |