+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: CB1100RS handlebars (/showthread.php?tid=8473)
CB1100RS handlebars - cooky6660_imp - 08-04-2018
Hi
I’ve recently bought a CB1100RS. I’m finding the bars a bit low. Does anyone know if the bars off the EX can be retrofitted or would I need all the other stuff off the EX to complete.
Thanks
RE: CB1100RS handlebars - Cormanus - 08-04-2018
G’day, cooky. Welcome. There’s not too many RS owners here, but you may well get an answer.
Meanwhile, have you tried looking at a parts diagram online to see whether the part numbers align?
RE: CB1100RS handlebars - Aussieflyer - 08-04-2018
Hey there Cooky,
congratulations on the new RS, love that model. You could try something like these simple handlebar risers that are on eBay:
https://www.ebay.com/itm/30mm-Handlebar-risers-CB400-CB400SF-CB500-CB650F-CB750SF-CB1000SF-CB1100F-S/151690878006?hash=item23517b1c36%3Ag%3AyjEAAOSwGzlTsiuq&_sacat=0&_nkw=handlebar+risers+cb1100&_from=R40&rt=nc&_trksid=m570.l1313
They are the easiest and quickest way to add height.
RE: CB1100RS handlebars - MaFiHa_imp - 08-04-2018
https://sw-motech.com/en/products/ergonomics/handlebar/bar+riser/
Those are a little bit pricey but I ordered it for my RS, too. 15 cm.
High quality
RE: CB1100RS handlebars - cooky6660_imp - 08-04-2018
(08-04-2018, 08:59 AM)Aussieflyer_imp Wrote: Hey there Cooky,
congratulations on the new RS, love that model. You could try something like these simple handlebar risers that are on eBay:
https://www.ebay.com/itm/30mm-Handlebar-risers-CB400-CB400SF-CB500-CB650F-CB750SF-CB1000SF-CB1100F-S/151690878006?hash=item23517b1c36%3Ag%3AyjEAAOSwGzlTsiuq&_sacat=0&_nkw=handlebar+risers+cb1100&_from=R40&rt=nc&_trksid=m570.l1313
They are the easiest and quickest way to add height.
(08-04-2018, 07:41 AM)Cormanus_imp Wrote: G’day, cooky. Welcome. There’s not too many RS owners here, but you may well get an answer.
Meanwhile, have you tried looking at a parts diagram online to see whether the part numbers align?
I will do that thanks.
RE: CB1100RS handlebars - Cormanus - 08-04-2018
When I looked at this thread again, I was reminded that there were two or maybe three different types of bars available for the 2013 CB1100. My suspicion is that you should simply be able to swap them over, but please don't take my word for it.
RE: CB1100RS handlebars - cooky6660_imp - 08-05-2018
(08-04-2018, 09:11 AM)MaFiHa_imp Wrote: https://sw-motech.com/en/products/ergonomics/handlebar/bar+riser/
Those are a little bit pricey but I ordered it for my RS, too. 15 cm.
High quality
Any idea how high you can go with the risers before changing cables etc?
RE: CB1100RS handlebars - MaFiHa_imp - 08-05-2018
(08-05-2018, 01:20 AM)cooky6660_imp Wrote:(08-04-2018, 09:11 AM)MaFiHa_imp Wrote: https://sw-motech.com/en/products/ergonomics/handlebar/bar+riser/
Those are a little bit pricey but I ordered it for my RS, too. 15 cm.
High quality
Any idea how high you can go with the risers before changing cables etc?
Any idea how high you can go with the risers before changing cables etc?
20 mm, not higher
RE: CB1100RS handlebars - jtopiso_imp - 08-05-2018
(08-04-2018, 09:11 AM)MaFiHa_imp Wrote: https://sw-motech.com/en/products/ergonomics/handlebar/bar+riser/
Those are a little bit pricey but I ordered it for my RS, too. 15 cm.
High quality
Are there more elegant solutions? Are there replacement parts for the lower halves of the clamps, with different heghts?
(15cm seems a bit too much. Check your units!
)
RE: CB1100RS handlebars - MaFiHa_imp - 08-05-2018
(08-05-2018, 05:42 PM)jtopiso_imp Wrote:(08-04-2018, 09:11 AM)MaFiHa_imp Wrote: https://sw-motech.com/en/products/ergonomics/handlebar/bar+riser/
Those are a little bit pricey but I ordered it for my RS, too. 15 cm.
High quality
Are there more elegant solutions? Are there replacement parts for the lower halves of the clamps, with different heghts?
(15cm seems a bit too much. Check your units!
Are there more elegant solutions? Are there replacement parts for the lower halves of the clamps, with different heghts?
(15cm seems a bit too much. Check your units!
) mm, not cm
Sorry!
