+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: So, What's the deal with bar-backs? (/showthread.php?tid=8441)
So, What's the deal with bar-backs? - Rexburgtom_imp - 02-14-2020
Looking at the posts about bar-backs and risers. The preferred brand has been dis-continued. What is the next best product for a tall rider. My spine will thank you.
RE: So, What's the deal with bar-backs? - redbirds_imp - 02-15-2020
(02-14-2020, 11:50 PM)Rexburgtom_imp Wrote: Looking at the posts about bar-backs and risers. The preferred brand has been dis-continued. What is the next best product for a tall rider. My spine will thank you.
Here you go, https://www.twistedthrottle.com/shop-by-product/ergonomics-rider-comfort/handlebar-risers
RE: So, What's the deal with bar-backs? - jimgl3_imp - 02-15-2020
I find these Chinese made ones on EBay for $16. first go round they wouldn't quite tighten up in the stock clamps, so I put safety wire around the bottom things that go in the stock clamps where the handle bar used to go and walla! they tighten right up
RE: So, What's the deal with bar-backs? - Charlie Bravo_imp - 02-18-2020
I've put home-made risers under the clamps on several bikes I've owned. I just used 1/2" drive heavy-wall chrome 19mm sockets of various lengths, depending on how much rise I wanted and cable length. A longer bolt and your in.