+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: DIY Top Box (/showthread.php?tid=8295)
DIY Top Box - Roper_imp - 06-23-2018
What I want in a top box:
- It has to be watertight.
- It has to be rugged.
- It has to be big enough to hold my camera bag.
- It has to carry a few other things for commuting.
- I have to be able to lock it.
- I'll bolt it directly to my OEM rack.
- It can't look stupid.
What I don't need:
- I don't care about name brands.
- I don't want aluminum.
- It doesn't need to hold a helmet.
- I don't care about matching panniers. I have soft bags I can put on for overnights.
- I don't want to pay a ridiculous amount of money.
- I don't need a quick release or an adapter bracket.
So, I found a Seahorse case that met my needs. It was half the price of Pelican cases, but just as strong and water tight. And made in the USA. Besides, Pelican didn't have one in the size I wanted. I bought the case new on Amazon. I bought the mounting hardware at the local ACE hardware store. I measured and marked, measured and checked the marks, and measured and checked a third time then drilled holes. I mounted the case directly to the rack and sealed around the bolts with silicone. Total investment: $65 and two hours.
RE: DIY Top Box - Lord Popgun - 06-23-2018
And it looks great!!
Warning. You might as well take a pic or 2 of how you mounted it cause you’re going to get questions
RE: DIY Top Box - the Ferret - 06-23-2018
Economical and it even looks good on the bike. can't beat that!
DIY Top Box - Retsel_imp - 06-23-2018
Looks really good. I did a similar project with the DeWalt, tough case, a while back. The beauty of that case is there are several size options with the same mount set up.
http://cb1100forum.com/forum/showthread.php?tid=9284&share_tid=9284&share_fid=74616
Sent from my Moto G (5) Plus using Tapatalk
RE: DIY Top Box - Cormanus - 06-23-2018
Roper, what size box (or model number) is that, please?
RE: DIY Top Box - clearviewx - 06-23-2018
Well done.
RE: DIY Top Box - Frulk_imp - 06-23-2018
Nice clean install. Looks OEM.
RE: DIY Top Box - JohnfromSTL_imp - 06-24-2018
Tempted to do the same, looks great! I think it's the SE-540?
https://www.amazon.com/gp/product/B002G1YC14
RE: DIY Top Box - Roper_imp - 06-24-2018
Cormanus and John: Yes, it's the Seahorse 540. You can get it in different colors, with or without foam. You can even contact Seahorse and they can do custom colors. I bought mine at Amazon-- $56 like in John's link.
And thanks for the compliments, y'all. I was really paranoid about getting the measurements right and drilling holes in the case. But everything turned out well. When I take it off, I think I'll make a template that can be used with other cases for that rack.
RE: DIY Top Box - use2b_imp - 06-24-2018
I like it , seldom do i like any of them but that seems to fit right in