+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: 51K Spruce Up (/showthread.php?tid=8178)
51K Spruce Up - bflint - 06-05-2021
While doing my 1st valve adjustment (vendors did prior 3) I decided that my CB1100DX deserved a spruce up after 51K miles. Items included:
1. Adjust valves - Could not have done without LakeWylieJoe Norris.
2. Refinish valve cover.
3. Refinish forks.
4. Refinish ABS rings.
5. Refinish black headlight cover and speedo-tak front covers.
6. Replace speedo-tac console cover. Had "melted spot" on it caused by windshield magnification.
7. Recovered leather seat. Corbin recovered my Chip Beck spec seat to original.
8. Touchup gas tank - Had 3 itty bitty chips & 1 itty bitty dent. Local SpeedZone Paint owner took 5 weeks, but kept all decals/badges in place and paint match was dead on.
*FORKS*
*ABS*
*HEADLIGHT & SPEEO-TAC*
*SEAT*
*TANK*
RE: 51K Spruce Up - the Ferret - 06-05-2021
wow..looking good. Wanna do mine? lol
RE: 51K Spruce Up - treedoc_imp - 06-05-2021
Looks really nice work bflint, good for another 50k now!
RE: 51K Spruce Up - Houtman_imp - 06-05-2021
You did a great job Bill !
RE: 51K Spruce Up - GoldOxide_imp - 06-05-2021
Beautiful bflint.
How "out" were your valve clearances? All cylinders?
RE: 51K Spruce Up - peterbaron - 06-05-2021
>> P R O F E S S I O N A L<<
RE: 51K Spruce Up - PowerDubs_imp - 06-05-2021
Good job
RE: 51K Spruce Up - bflint - 06-07-2021
(06-05-2021, 08:53 AM)GoldOxide_imp Wrote: Beautiful bflint.Spreadsheet Link: http://cb1100forum.com/forum/attachment.php?aid=12929
How "out" were your valve clearances? All cylinders?
*
EX : all ok +/- .001in
IN : 5 ok +/- .001in ... 3 out at +.002in
RE: 51K Spruce Up - Tev62 - 06-07-2021
Cracking job, the seat looks like a quality piece.
RE: 51K Spruce Up - GoldOxide_imp - 06-07-2021
(06-07-2021, 03:35 AM)bflint_imp Wrote:Spreadsheet Link: http://cb1100forum.com/forum/attachment.php?aid=12929(06-05-2021, 08:53 AM)GoldOxide_imp Wrote: Beautiful bflint.Spreadsheet Link: http://cb1100forum.com/forum/attachment.php?aid=12929
How "out" were your valve clearances? All cylinders?
*
EX : all ok +/- .001in
IN : 5 ok +/- .001in ... 3 out at +.002in
*
EX : all ok +/- .001in
IN : 5 ok +/- .001in ... 3 out at +.002in
Hey, not too bad: ~81%.