+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: Front Fender Splash Guard (/showthread.php?tid=8086)
Front Fender Splash Guard - Wagonpeddler_imp - 02-20-2022
Due to the rather short front fender, it allows dirt, mud, etc. to collect on the bottom of the engine, and headers. Anyone know of a mud flap, splash guard, or similar lower fender extension that would attach without drilling holes in the fender?
Thanks!
RE: Front Fender Splash Guard - peterbaron - 02-20-2022
Fenda Extenda, I have on both of my CBs, perfect fitting and performance = NO drilling.
https://www.motomachines.com/pyramid-plastics-extenda-fenda-fender-extender-honda-cb1100-13
![[Image: bbacad78203fa300f4566dba67f57e94.jpg]](https://cb1100forum.net/forum/uploads/imp/202202/bbacad78203fa300f4566dba67f57e94.jpg)
Courtesy of Rocky's bike
RE: Front Fender Splash Guard - Rocky_imp - 02-20-2022
Thanks PB.
I highly recommend this front fender accessory. I have one on both of my Honda's.
I attached mine with marine grade J B Weld and they'll never come off.
RE: Front Fender Splash Guard - GoldOxide_imp - 02-20-2022
Most are affixed with grey 3M VHB foam tape.
RE: Front Fender Splash Guard - peterbaron - 02-20-2022
(02-20-2022, 08:17 AM)Rocky_imp Wrote: Thanks PB.
I highly recommend this front fender accessory. I have one on both of my Honda's.
I attached mine with marine grade J B Weld and they'll never come off.
I also used JB Weld.
RE: Front Fender Splash Guard - Wagonpeddler_imp - 02-20-2022
That's perfect!
Many thanks.
Nice bike, PB.
RE: Front Fender Splash Guard - peterbaron - 02-20-2022
(02-20-2022, 10:14 AM)Wagonpeddler_imp Wrote: That's perfect!
Many thanks.
Nice bike, PB.
This blue beauty belongs to our member Rocky.
He has a fleet of five!
RE: Front Fender Splash Guard - Gone in 60 - 02-20-2022
Used 3M VHB tape on mine, holds just fine.
RE: Front Fender Splash Guard - GoldOxide_imp - 02-20-2022
(02-20-2022, 12:01 PM)Gone in 60_imp Wrote: Used 3M VHB tape on mine, holds just fine.
Totally agree. JB Weld would be overkill.
RE: Front Fender Splash Guard - Lord Popgun - 02-20-2022
I used 3m 4200 or 5200 (can’t remember exactly now) fast cure on mine.