+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: Quad lock stem mount (/showthread.php?tid=7963)
Quad lock stem mount - Dunn2020_imp - 05-24-2023
I have searched for this, but help needed. Do the center stem cover allow for fitment? I haven’t removed the nut ever, and I was thinking of boring the old handle bar mount hole bigger. I have clip on’s, so two empty holes already that are just a bit small for it. No handle bar room without getting weird.
Quad lock stem mount - mvk24_imp - 05-24-2023
I gotta be honest I'm having a hard time visualizing what you're asking.
2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
RE: Quad lock stem mount - Lord Popgun - 05-24-2023
(05-24-2023, 07:43 AM)mvk24_imp Wrote: I gotta be honest I'm having a hard time visualizing what you're asking.
2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
What MVK said
RE: Quad lock stem mount - Gone in 60 - 05-25-2023
Dunn, if you're looking at the standard Quad Lock mount, where it drops into a stem nut that has a hole in it, not sure if that would work.
The nut is solid on top with no hole - at least my '13 is, not sure if later models used a stem nut that's got a hole in the center.
Am I understanding what you want to do? You could just do a phone mount that clamps on to the bar in the center between the handlebar clamps.
RE: Quad lock stem mount - Dunn2020_imp - 06-06-2023
Thanks for the replies. I am trying to install the quadlock fork stem system. I have no room on my clipons for a good handle bar mounting spot.
RE: Quad lock stem mount - pekingduck - 06-07-2023
I think you're looking for a top center stem nut with a big hole in it. Honda part number 90304-MJ4-670 should fit. It's used on many models, particularly sport bikes, and retails for $14.80.