+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7)
+--- Thread: 8K Service cost? (/showthread.php?tid=5812)
Pages:
1
2
8K Service cost? - mnm2008_imp - 06-14-2015
What does a 8K service generally cost on the new CB's?
Sent from my iPhone using Tapatalk
RE: 8K Service cost? - Motogeezer1949_imp - 06-14-2015
Deja vu I'm thinking......
RE: 8K Service cost? - Pterodactyl_imp - 06-14-2015
Do it yourself and spend the rest on essentials (in the interests of FD*, I will not elaborate).
Cheers
* if you haven't been paying attention - Forum Decorum
RE: 8K Service cost? - Lord Popgun - 06-14-2015
MNM,
It depends. Probably not very much just to check the valve clearance, but if any need adjusting the cams have to come out and the labor costs will go up. I do not know how long the book says it takes, or how long it actually does.
8K Service cost? - Cormanus - 06-15-2015
So far, though, I don't think anyone's reported the need for value clearance adjustment. Mine have been checked 3 times now and continue to be in spec.
RE: 8K Service cost? - the Ferret - 06-15-2015
RandyB said he had a bunch of valves adjusted.. all on same bank. Very unusual. Last I heard he was still looking for his receipt to see how many and on which bank and if they exchanged shims or charged him etc etc
But he is the only one I can recall having a valve adjusted
RE: 8K Service cost? - Pterodactyl_imp - 06-15-2015
(06-15-2015, 07:56 AM)Cormanus_imp Wrote: So far, though, I don't think anyone's reported the need for value clearance adjustment. Mine have been checked 3 times now and continue to be in spec.
Slight correction there mate. Mine were adjusted and shimmed by a dealer (Sydney's largest) at the first major. It, the whole service that is, was a costly exercise, in excess of $1000. The cost, plus some irregularities in the way the bike was returned to me made me decide to go to DIY. The two valve clearance checks I have since done have shown the valves to be in spec.
Cheers
8K Service cost? - Cormanus - 06-15-2015
Oh, well. There you go. Sorry chaps. I was wrong.
RE: 8K Service cost? - the Ferret - 06-15-2015
Ptero... $1000 wow! Do you have the receipt? How many valves? Which bank? Did they charge you for shims or swap? Did they provide you with the measurements on each valve?
RE: 8K Service cost? - Lord Popgun - 06-15-2015
Is that Australian dollars or US?