The CB1100 Community Forum
Lean cylinders? - Printable Version

+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7)
+--- Thread: Lean cylinders? (/showthread.php?tid=5665)



Lean cylinders? - mattmcuomo@yahoo.com - 01-14-2016

Anyone else have the two inside cylinders look like they're running too lean? Am I being paranoid? [Image: 0e7734c7b81937103777ce83874595c9.jpg]

Sent from my C6725 using Tapatalk


RE: Lean cylinders? - Gumby 1100_imp - 01-14-2016

I think that it is just the nature of an inline, air-cooled, four cylinder for the inner cylinders to run hotter. They are not getting the same air flow and they have less fin exposure to the air.

My inner two header pipes also tend to blue a bit more than the outer two (especially at the top edge near the flange). Some OptiGlanz and some Autosol metal polish usually takes care of the discolouring for a few months.


RE: Lean cylinders? - mattmcuomo@yahoo.com - 01-14-2016

I figured that the two inside run hotter, I'm being paranoid. I don't mind the look really.
Thanks

Sent from my C6725 using Tapatalk


RE: Lean cylinders? - LongRanger_imp - 01-14-2016

How do the #2 and #3 plugs look? If they're about the same as #1 and #4, I wouldn't be too concerned.


RE: Lean cylinders? - mattmcuomo@yahoo.com - 01-14-2016

(01-14-2016, 11:22 AM)LongRanger_imp Wrote: How do the #2 and #3 plugs look? If they're about the same as #1 and #4, I wouldn't be too concerned.

Good question, I haven't looked Cool


RE: Lean cylinders? - Toddman_imp - 01-15-2016

Every aircooled inline 4 i've ever had runs hot on #2. Nature of the beast.


RE: Lean cylinders? - Jim21680_imp - 01-15-2016

Boy do I wish my headers looked like that.


RE: Lean cylinders? - EarsOnWheels_imp - 01-18-2016

How can I make my outside ones look as cool as the inner two?


RE: Lean cylinders? - kmoney_imp - 01-18-2016

(01-18-2016, 11:30 AM)EarsOnWheels_imp Wrote: How can I make my outside ones look as cool as the inner two?
Propane torch, lots of care, and some learning as you go.