+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7)
+--- Thread: Factory Tool Kit (/showthread.php?tid=5613)
Factory Tool Kit - Hedge_imp - 05-08-2015
As most of you know, the American CB's come with virtually no tools out of the approximately 20 available. I brought this to the attention of my salesman and he ordered the complete set for me and comp me on it. I believe all in its about $82.
[url=http://s189.photobucket.com/user/HedgeFundGeek/media/Mobile%20Uploads/2015-05/C5690F1D-63D9-4B97-890D-174F0B27C287.jpg.html]
![[Image: 7669649d15e604802adf64e290439ff7.jpg]](https://cb1100forum.net/forum/uploads/imp/201505/7669649d15e604802adf64e290439ff7.jpg)
RE: Factory Tool Kit - the Ferret - 05-08-2015
That's it , rub it in.
RE: Factory Tool Kit - Rocky_imp - 05-08-2015
Same here.
My CB only came with 3-4 tools. The salesman ordered the rest of them and they came no charge.
RE: Factory Tool Kit - Setchman_imp - 05-08-2015
Unfortunately, I didn't know to ask about the toolkit when I bought my bike since I didn't realize we had been shortchanged until reading about it here. I looked around for a nice aftermarket kit but realized that, for the same price or cheaper, I could just do what the dealership did for you guys and buy the remaining OEM tools separately. Now I only carry tools that are useful for the CB1100 and they all fit neatly into the existing pouch.
I think I saw this in another thread somewhere but MotoSport has the best price that I could find. All the remaining tools cost me $50.36, shipped. Here's a link to the OEM toolkit:
[url=http://www.motosport.com/motorcycle/oem-parts/honda/2014/cb1100/tool]CB1100 OEM Toolkit
Here's a list of the remaining tools needed to fill out the toolkit:
2 - BAG, SERVICE BOOK 77251-GR1-000 1 $3.00
3 - WRENCH, BOX (P14) | (Optional) 89216-KVZ-630 1 $8.87
4 - WRENCH, EYE (32) 89218-MAZ-000 1 $7.55
7 - SPANNER, PIN 89230-MB1-000 1 $15.12
8 - WRENCH (8X12) (OPEN END) 99001-08120 1 $2.33
9 - WRENCH (10X14) (OPEN END) 99001-10140 1 $2.57
10 - WRENCH (14X17) (OPEN END) 99001-14170 1 $3.01
12 - SCREWDRIVER 3 STRAIGHT SLOTNO 99003-30000 1 $1.00
14 - HANDLE, EYE WRENCH (120MM) 99006-12000 1 $2.64
15 - WRENCH, EYE (27MM) 99006-27000 1 $4.27
The first item, "BAG, SERVICE BOOK" is the zip-lock back that our operator's manual came in. You don't need it except for the fact that without it the price came in under $49 which was the cutoff for free shipping. Shipping is $8 so by not including the bag the total cost shipped would be $55.36 instead of $50.36.
FYI, item #5 (in the picture) is a hex wrench that is not available for purchase anywhere. The one we already have in our kit is item #6 (5mm hex). Honda must have changed something after they drew up and distributed that picture.
RE: Factory Tool Kit - BestStandard_imp - 05-08-2015
The screw driver that comes with the bike was absolutely useless when I tried to remove the battery terminal screws to install a charger plug. The handle is way too small to get any kind of leverage, good luck using it for any repairs on the road.
RE: Factory Tool Kit - White Dog_imp - 05-08-2015
I kept a complete tool set from a previous cycle so I put it under the seat with the 1100 tool kit. Complete tool kits have been available on ebay in the past, reasonably priced.
RE: Factory Tool Kit - Lord Popgun - 05-09-2015
White Dog,
Yeah, but those were carbureted tool kits. We need fuel injected tool kits
RE: Factory Tool Kit - metallyguitarded_imp - 05-09-2015
Don't need a tool kit. Have RLETs.
RE: Factory Tool Kit - Novice_imp - 05-09-2015
My Honda dealership is ordering all of it for me. Those look all nice and silvery unlike my last Honda tool kit, all the tools in it had a gold tint.
RE: Factory Tool Kit - ClassicVW_imp - 05-09-2015
they're a bit expensive, but very well made and they have different sets for different make bikes- Cruz Tools. Sometimes can be found on eBay.