+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7)
+--- Thread: Road Comet 2 fairing (/showthread.php?tid=5524)
Road Comet 2 fairing - zippooriginal_imp - 08-13-2016
I just received my Road Comet 2 black fairing with smoke shield. Will look great on my bike! Just one thing I'd like to correct. All the steel bolts that connect the shield to the fairing are steel screws. I'd like to paint them black so they blend in and look so much better.
Which is the BEST spray paint I should use for best results???
Thanks.
RE: Road Comet 2 fairing - Chapomis_imp - 08-13-2016
I would use rustolium. I think they make it now so primer isn't needed
RE: Road Comet 2 fairing - crutch_imp - 08-13-2016
(08-13-2016, 06:30 AM)zippooriginal_imp Wrote: I just received my Road Comet 2 black fairing with smoke shield. Will look great on my bike! Just one thing I'd like to correct. All the steel bolts that connect the shield to the fairing are steel screws. I'd like to paint them black so they blend in and look so much better.
Which is the BEST spray paint I should use for best results???
Thanks.
I used black rustoleum that I had sitting around. Blends in fine.
I was really impressed by the quality of the hardware that was included.
life's short
take the long way home
crutch
RE: Road Comet 2 fairing - zippooriginal_imp - 08-13-2016
Thanks for the input, rustoleum is the way to go.