+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7)
+--- Thread: Please help me identify a part (/showthread.php?tid=5408)
Please help me identify a part - dimitrix_imp - 04-23-2017
Hi all, I just discovered a cracked part on my 2014 CB1100. I don't know what to call it, but from studying the diagrams on [url=http://www.bikebandit.com/oem-parts/2014-honda-cb1100/o/m155474#sch848019]bikebandit I think I've narrowed it down to what they call a balancer shaft (Part number 15 on the diagram)?
Can somebody confirm that the part is in fact damaged and that I've identified the right part number on the diagram?
Also do you think it is a quick fix of replacing it or do I have a lot to disassemble?
![[Image: 31ad136bca8191e374c2be632098f2ce.jpg]](https://cb1100forum.net/forum/uploads/imp/201704/31ad136bca8191e374c2be632098f2ce.jpg)
Please help me identify a part - Arctic cb1100_imp - 04-23-2017
no the balancer shaft holder on your bike is not damaged they are all that way with a bolt going through them to pinch the holder on the shaft! no need to ever remove it unless doing engine disassembly
Sent from my SAMSUNG-SM-G900A using Tapatalk
RE: Please help me identify a part - Cormanus - 04-23-2017
Apologies, Arctic CB1100, but I've deleted the picture of the workshop manual page for copyright reasons.
RE: Please help me identify a part - curlyjoe - 04-23-2017
Yep, that's normal. That's exactly where you can adjust the backlash of the balancer shaft.
Here's the [url=http://cb1100forum.com/forum/showthread.php?tid=3853]thread in the how to section.
RE: Please help me identify a part - Arctic cb1100_imp - 04-23-2017
sorry I should have thought about posting from the manual
RE: Please help me identify a part - AzBob_imp - 04-24-2017
(04-23-2017, 07:25 AM)Cormanus_imp Wrote: Apologies, Arctic CB1100, but I've deleted the picture of the workshop manual page for copyright reasons.
Copying a single page of the shop manual is not a violation of copyright -- it's clearly within the [url=https://www.copyright.gov/fair-use/more-info.html]fair-use clause of U.S. copyright law.
RE: Please help me identify a part - Arctic cb1100_imp - 04-24-2017
good to know! no wrong doing intended just using for a double confirmation picture of what it looks like
RE: Please help me identify a part - Cormanus - 04-24-2017
I was sure you meant no harm, Arctic.
AzBob, you're likely right about fair use, but we have had a forum policy of not allowing photos of pages of manuals and for the moment I'm sticking to it. Unlikely, I know, but you could see a forum such as this incrementally publishing the entire workshop manual on line and the publisher being a bit upset.
Please help me identify a part - PowerDubs_imp - 04-24-2017
I'd say no. But it's not my forum. The manufacturers benefit greatly from positive enthusiast communities, and are not hurt by us helping each other keep the bikes running. I've been on countless forums for both bikes and cars and have never once heard of a complaint from a manufacturer because of a workshop manual picture.
But again- not my forum so I will abide by your rules.
That being said- I also may start drawing the diagrams in MS Paint by hand, and writing out the tq specs and instructions. Nothing illegal whatsoever about sharing learned information 2nd hand.
