+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7)
+--- Thread: Dream’n (/showthread.php?tid=5225)
Dream’n - Razor - 04-07-2018
I’ve got four potential projects, so dreaming about doing something to the CB1100 might be down the road a bit.
For the purists; please forgive me!
Imagine a GSXR750 front end and a CBR900RR swingarm? Throw in some minor bracing and maybe a ‘17 style tank w/red stripe.
What do you think?
RE: Dream’n - PowerDubs_imp - 04-07-2018
I'm all for screwing around with things- but only with reasons why...
No need for a gixxer front end. If you want upside down forks and fancy brakes, the '17 RS setup exists. Already calibrated to work great.
Likewise the rear end- check out Samurider - there are aftermarket alu swingarms custom made- plug and play. Bracing, no bracing, your choice- either way- no mess, no hassles.
Yea- cost a lot, but will work out of the box. Unless you want a frankenbike for braggin rights at your local bar / parking lot.
RE: Dream’n - Flytech99_imp - 04-07-2018
(04-07-2018, 03:48 AM)Razor_imp Wrote: I’ve got four potential projects, so dreaming about doing something to the CB1100 might be down the road a bit.
For the purists; please forgive me!
Imagine a GSXR750 front end and a CBR900RR swingarm? Throw in some minor bracing and maybe a ‘17 style tank w/red stripe.
What do you think?
I'm definitely not a purist, so this sounds like a great project to me! Maybe make it into a real-world version of the CB1100TR concept (pic below)... or a truly "sporty" RS?
Plenty of highly modified ZRXs out there too if you're looking for inspiration on taking a steel-cradle framed I-4 to the next level!
RE: Dream’n - Razor - 04-07-2018
Samurider’s aluminum swingarms are nice, but I was leaning towards a monoshock.
You got me thinking thou... what about one of Samurider’s swingarms, modified for a monoshock design? Should would make the sprocket alignment and brake choice easy
The GSXR front ends are in abundance, can be had for a decent price, and they’re set up for clip-ons. Only hitch would be adapting the controls.
The CB1100TR is very cool! Inspiring
RE: Dream’n - DAC - 04-08-2018
Ray, I think you're on to something. If anyone could do a standard race concept, or cafe racer or whatever you call it, and do it right - it'd be you. I'll be watching for the thread!!
RE: Dream’n - Razor - 04-10-2018
(04-08-2018, 02:30 AM)DAC_imp Wrote: Ray, I think you're on to something. If anyone could do a standard race concept, or cafe racer or whatever you call it, and do it right - it'd be you. I'll be watching for the thread!!
Thanks for the vote of confidence!
More thoughts... always liked the dual exhaust on the DLX’s.
How about a dual “Yoshimura” look a like , 2-1 w/a crossover tube