![]() |
|
2013 ABS with 20k? - Printable Version +- The CB1100 Community Forum (https://cb1100forum.net/forum) +-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5) +--- Forum: General Discussion (https://cb1100forum.net/forum/forumdisplay.php?fid=6) +--- Thread: 2013 ABS with 20k? (/showthread.php?tid=509) |
2013 ABS with 20k? - socal-dustin_imp - 12-01-2021 Hey I'm looking at a 2013 ABS with 20k miles on it tomorrow. Has new tires and new fork seals. Anything else I should look out for besides normal wear and tear? The owner is asking $6500, but I think that's steep given the mileage. I'm in Southern CA, though, so price may be fair. Thoughts? RE: 2013 ABS with 20k? - LongRanger_imp - 12-01-2021 If it’s in good shape and unmolested, $5000 would be a fair price. Make sure it’s really an ABS model, because lots of folks mistakenly think their ‘13 is an ABS. RE: 2013 ABS with 20k? - peterbaron - 12-01-2021 Posts # 4, 8, 9 http://cb1100forum.com/forum/showthread.php?tid=17281&pid=304671#pid304671 RE: 2013 ABS with 20k? - GoldOxide_imp - 12-01-2021 Sounds like some fun socal-dustin. Good luck, and try to enjoy the discovery. Above all? Welcome to the Forum. RE: 2013 ABS with 20k? - Cormanus - 12-01-2021 socal-dustin, welcome to the forum. If the bike has ABS, there will be a slotted sensor ring on the front wheel. The one on the rear wheel is a speed sensor. The VIN will also begin JH2SC655. RE: 2013 ABS with 20k? - jerrycon_imp - 12-01-2021 For comparison, I recently sold my 2014 Standard (black) in Northern California. Asking price was $7,000, and I sold it for $6,700. My bike also had nearly new tires (Metzeler Roadtec Z8 Interact). No need for new fork seals because the bike had only 6,200 miles on it. RE: 2013 ABS with 20k? - dave - 12-03-2021 (12-01-2021, 09:07 AM)socal-dustin_imp Wrote: Hey I'm looking at a 2013 ABS with 20k miles on it tomorrow. Has new tires and new fork seals. Anything else I should look out for besides normal wear and tear?You might want to ask why the fork seals needed replacement. Look very closely at the fork tubes for pitting, or any damage to the chrome. I'm in S. Ca, my bike is stored indoors, and is almost never ridden in the rain, and one of my fork tubes began pitting. I used this as an excuse to purchase the upgraded forks used on the 2017 model. RE: 2013 ABS with 20k? - GoldOxide_imp - 12-03-2021 (12-03-2021, 09:06 AM)Dave_imp Wrote:(12-01-2021, 09:07 AM)socal-dustin_imp Wrote: Hey I'm looking at a 2013 ABS with 20k miles on it tomorrow. Has new tires and new fork seals. Anything else I should look out for besides normal wear and tear?You might want to ask why the fork seals needed replacement. Look very closely at the fork tubes for pitting, or any damage to the chrome. I'm in S. Ca, my bike is stored indoors, and is almost never ridden in the rain, and one of my fork tubes began pitting. I used this as an excuse to purchase the upgraded forks used on the 2017 model. Yeah, my fork tubes pitted a wee bit after years of the CB1100 being stored outdoors in the heat 'n' humidity of summer and the hard bowels of arctic winter. But, solvable in about 10 minutes of effort using "Peek" metal polish. RE: 2013 ABS with 20k? - Gone in 60 - 12-03-2021 Hi Dustin, good luck with the search. Where you at? RE: 2013 ABS with 20k? - Houtman_imp - 12-03-2021 The 2017 front forks are great upgrade on the earlier ones. |